Curious_Canid

joined 1 year ago
[–] [email protected] 26 points 4 days ago (5 children)

If you can get relatives to help, do that. If not, contact a local women's shelter or other abuse-related non-profit. They may or may not be able to help directly, but they will most likely know what other resources are available.

I wish you the best.

[–] [email protected] 7 points 4 days ago

That depends a great deal on what the local police are like. They may help. They may just let the family know about the complaint. Generations of abused women provide an unfortunate history of these issues.

And even if the police do help, they will not be able to provide protection. Their job is to arrest and prosecute the brother after he commits the murder. It's sad and wrong, but that is the way the system works.

[–] [email protected] 9 points 5 days ago

I'm pretty sure he realizes it. What he doesn't want is for everyone else to realize it too.

[–] [email protected] 38 points 5 days ago (4 children)

I've been a Washington Post subscriber for almost a decade. I just cancelled.

Now I need to figure out which independent news organizations that money should go to instead.

[–] [email protected] 5 points 1 week ago

Possibly, but life is full of risks.

[–] [email protected] 8 points 1 week ago (3 children)

What you really need is a carbon fiber shoehorn. If you do manage to deform it the thing will go right back to its original shape.

[–] [email protected] 7 points 1 week ago

I understand the desire to get even, but it isn't likely to happen and it isn't likely to be satisfying, even if you succeed. You should focus on things that will make your life better and not things that will make someone else's life worse, even if they richly deserve it.

You are going to have to make some compromises. You are currently putting up with a situation you don't like, in exchange for the salary, side benefits, and location. That's isn't necessarily a bad tradeoff, but it is not likely to be a good long-term situation. Once management decides they have a problem with you, things are going to get worse sooner or later. It will be better for you if you leave rather than being forced out.

You need to make some decisions about which of the things you like about your situation you would be willing to give up for a better job. That will tell you what to do next. Maybe the answer is to hold out for a better position within your current organization, although the chances don't sound good. You may need to take a salary cut to find a local position that's better for you. You may need to move. You may even need to change careers entirely.

The key is to make your own decisions and not allow others to force them on you. There are a lot of factors you can't control. Focus on the ones you can. And don't stay in a bad situation with the hope that everything will work out the way you want it to.

[–] [email protected] 7 points 1 week ago

That is a life well spent.

[–] [email protected] 0 points 2 weeks ago

He's a beautiful croissant!

My 75 lb (34 kg) puppy has unusually long legs, but he's still figured out a way to fit in my lap. He has also mastered the croissant technique. Mathematicians should ask dogs for help with their unsolvable topology problems.

[–] [email protected] 1 points 2 weeks ago

G.

That is a cute puppy!

[–] [email protected] 11 points 2 weeks ago

It is wrong that we live in a world where some people's automatic response to anything they don't like is a death threat. People who think that way need to be educated, treated, or incarcerated. And we need to stop providing them with any form of enabling or encouragement.

Liu continues to impress me as a thoughtful and level-headed person. He seems to be dealing with his sudden fame with unusual grace.

[–] [email protected] 21 points 2 weeks ago (1 children)

Possibly the best line of dialog ever spoken from a movie screen.

 

A trebuchet builds trust.

"I wouldn't trust him any farther than I could throw him."

"That will no longer be a problem."

 

I've been struggling with how to make sense of what the far right likes to call patriotism. Our democratic system of government is at the core of what defines America, but many of them are willing, and in some cases eager, to destroy that.

It finally hit me that what they love is not their country. They love their control of it. That is why racism, misogyny, homophobia, and other irrational hatreds are so deeply tied into far right movement. Only people like them should be allowed to have a say. The acceptance of diversity that began as religious freedom and has expanded to encompass all differences, directly threatens their control.

I wish that insight pointed a way to deal with the problem, but it really points up how intractable the problem is. There is no compromise that will satisfy both sides when one side is demanding complete control over the other.

This may be one of those problems that can only be solved by newer generations, who tend to have less rigid views of the world, gradually replacing the hard liners.

 

I always carry a couple of good knives with me, but I have lately gone on a utility knife kick. I'm not sure I want to carry one, but I definitely like having them around the house for opening boxes.

I don't think I've found the perfect one yet, but I do have some a like quite well.

The Oknife Otacle Pro is my favorite. It is small and very slim, but provides a good grip. The blade is completely covered, so I can use hook blades without worrying about exposed edges. The mechanism provides one-handed deployment with excellent safety. There is a neat little clip that works well and doesn't get in the way.

The mechanism is actually very good, but it gets terrible reviews. That's because it desperately needs to be lubricated and it comes from the factory dry. Mine was pretty much unusable until I sprayed it down with ToughGlide. Now it's one of the smoothest I've used.

My second favorite is the Nexland Sliding Utility Knife. The mechanism is very clever. It involves just a few pieces of titanium with no fasteners or springs. It should be pretty much indestructible. It's easy to use with one hand. Changing blades is simple and quick without tools. It also gets extra points for preventing the blade to drag along the track when it slides.

My honorable mention is the Screwpop Ron's Utility Knife 3.0. The mechanism is incredibly simple, but it works beautifully. I can deploy it one-handed, although it takes some practice. Changing blades is obvious and easy. There is also a magnet that can be used to attach it to things. The price is low enough that you can keep several in strategic locations around the house.

It is also worth pointing out the Outdoor Edge Slidewinder, which may be the best choice for the average person. The mechanism is more complex than I prefer, but it works well. There is a spring that retracts the blade as soon as you touch the button, which is a nice safety feature. It's a little bigger than the others, but still small and handy. There's a decent clip. There is also a slotted and a Phillips screwdriver.

I have also discovered some annoying limitations along the way. I put Lenox Gold blades into all my utility knives, but I've run into several that don't work with them, or with many other standard blades. They frustrate me.

The Oknife Otacle (non-Pro version) uses a different mechanism from the Pro that requires holes through the central axis of the blade. That rules out most utility blades.

Milwaukee Utility Knives are among the best, but the Compact Slide, which I wanted for its relatively small size, will not work with blades that have more than two notches at the top. I couldn't believe it and ended up taking it apart, but it really won't accept them.

The Manker UTI Edge is a nicely minimalist design, but it is just a tiny bit too short for a lot of standard blades. A fraction of a millimeter difference would have solved that problem. I also have some concerns about how well its lock holds.

Has anyone else gone down this particular rabbit hole?

 

The rules seem to imply that pocket dumps are required. Can we also post reviews / comments / discussions of EDC items here?

 

Is there any way to disable auto-play in Voyager? Video plays automatically even in the feed. I would rather nothing played without me telling it to. I feel like there must be a setting, but I can't find it.

 

There are plenty of politics communities, but they all seem to focus on posting and discussing articles. Is there a community for posting political ideas and opinions?

0
GOAT Multitool (www.goat.tools)
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
 

I've had my GOAT multitool for a couple weeks now. It's big feature is swapping the tools, but it has other advantages as well. The spring-loaded pliers are great and they use a "frame-based" spring that should hold up to heavy use. The bit driver will hold every type of bit (standard, double-ended, Leatherman, etc.) reliably and is somewhat offset toward the center, similar to the Gerber Center-Drive. One end of the tool is flat and reinforced to act as a light-use hammer. All tools can be removed, which means you can adjust the GOAT with the built-in Allen wrench and sharpen it with the built-in metal file. It includes a replaceable-blade X-Acto tool.

An inobvious, but potentially huge innovation, is making the tool and scale templates open source. Anyone can produce additional tool implements that will work in the GOAT. That could be a game changer if it catches on. Think about specialty toolsets for different professions, for example. Likewise, optional scales can be produced in any material or design.

The downside is that the current GOAT is clearly a first-generation tool. The tools clump badly. The "tool removal levers" clump with the tools, which can be a real problem. The pivots have to be carefully adjusted so the "springs" (the frame backs) will hold them all inside properly without being too stiff to fold out. The lock release mechanisms are awkward.

I would not have been comfortable carrying mine as it came out of the box. Fortunately, most of the issues can be fixed, or at least improved, with very little effort. Maxlvledc did a wonderful video on YouTube that talks about the issues and provides suggestions on how to address them. It was a big help to me and I recommend everyone with a GOAT watch it.

The things I did to "fix" mine were fairly simple. I added a thin shim washer (5x8x0.2mm) between each of the "tool removal levers" and the other tools. I re-arranged which tools were where and removed the washer next to the wood saw. Finally, I loosened the pivots a bit to help hold the tools inside the frame. (It seems like that should work the other way, but the pivots need to be somewhat loose to let the "springs" do their jobs.) Now it works quite well.

What do the rest of you think about the GOAT?

 

Can SnapRaid restore the a lost drive in the case where the other data drives have been written to since the last sync? My understanding of the principles is probably just lacking, but I worry that using parity based on the other drive's data would only work if the data on the other drives had not changed since the parity was last calculated.

So do I invalidate my last sync as soon as I write new data to a drive in my arrray?

view more: next ›