Silica with indicator is hazardous
Yes, even the orange-green ones
Buy some uncolored and use a microwave oven (Warning: only use very little micro power and check every 20 seconds, those things get hot enough to melt ceramic and are a fire hazard)
this post was submitted on 30 Jun 2025
30 points (96.9% liked)
3DPrinting
18778 readers
96 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 2 years ago
MODERATORS
For the love of God, or whatever, people!
STOP recommending that people use food preparation things to heat up material you have no clue about how safe they are. It's likely you are recommending people to poison themselves!!
get yourself a dehydrator for food that allows you to set time and temperature.
you can get silicone trays for the beads and bonus, you can use it to dry filaments.
This
I'm not "allowed" to dry it in the kitchen, so I plan on throwing it in the filament dryer with something like this.
It maxes out at 65°C but I'm fairly confident 10+ hours should do the trick.
Luckily I live in a place where it lasts forever, so I'm probably only going to be doing it once or twice per year. My current containers are 3+ months old and I'm at 18 and 14% humidity, according to the AMS's.
Sounds similar to my idea, though I don’t know whether 10h at 65°C would yield the same result as less time at 100°C. Printing such a box with PC or ABS would allow higher temperatures I think.
I use a small hotplate at about 125 degrees and an aluminium baking tray. If you spread the beads out thinly it will dry pretty quickly.
Alternatively you can use an old microwave and that should remove moisture from the silica gel in a matter of minutes. You can easily overheat them though and I would never use that microwave for food again.
I do something similar. 1st- Never use something that will be used for food again. There are 15€ used microwaves listed in my local secondhand app, but I live in a small apartment, and I don't have the spare space.
2nd. - I don't do this stuff in the kitchen.
I have a small induction plate, which can actually be set to temperature or power level, and wich is surprisingly accurate! I spent a morning doing testing, and the damn thing would be within 5°C everytime.
I use an enameled pan, which has been retired from food use, and do this in the balcony. I shake it around every so often, with the temp set at 110°C.
It really irks me how a bunch of Youtubers ignore basic safety measures, like using your oven, microwave etc to dry silica, filament, anneal parts etc. We normally have no clue as to the modifiers, additives, etc, or even the actual effects of fumes of the base plastics (maybe there is research, but I haven't seen anybody looking for it)
I'm working on a cheapo enclosure, and already have designed and printed a cheap and cheerful filter, to use EVERY time I print, no matter what the filament. If I don't have hard data about the toxicity of a material heated in my breathing space, I'm going to treat it as toxic.
Safe by default.
I dry my silica gel in a convection toaster oven at 125°C. I put a temperature probe in the bottom of the tray. The temperature will hold around 100°C while it's drying and jumps up fairly quickly when it's done. It usually takes around 90 minutes.
Don't put indicating silica gel in anything you will use for food, it's toxic. Some types are less toxic than others, but none are completely safe. I picked up a used toaster oven and baking tray from a thrift store and marked them "not for food".
A little tip for when you try out different methods: Check the weight of the silica gel, to check your progress.
For example: Take a container from the AMS, weigh it. Give it an hour in a food dehydrator. Weigh it. Repeat until weight no longer drops. Give it a couple hours or more in an oven that's at least 100 °C. Then weight it again.
Now you know how long it takes in the dehydrator, and how well it works.
Later you can weigh it again, and compare to the weight out of the oven. Now you know how much water is in there.
Great advice! Use two food preparation appliances to heat a material you have no clue about what it offgases in addition to water.
Enjoy your food.
The scientific method, eh? 😄
I microwave mine in a ceramic bowl on 30-40% power (in an 800w unit) for 20-30min, stir and give it another 20-30min. That usually restores them to a dry state and doesn't cause issues with overheating them.
This is the only way I’ve been successful with a microwave dry. For a standard 1000-1100 watt microwave, drop the power down to 20%.
I normally toss them into my food dehydrator while I’m drying filament rolls though so I don’t need another step.
lower temps work partially afaik and they will never fully dry the silica gel. You should aim for above 100°C
If you are concerned about safety have one dedicated oven dish for the silica gel and ventilate your oven and kitchen thoroughly after a session.
I do this, I have a toaster oven that lives in my garage solely for shop use. Have some foil to act as a bit of a heat deflector, seems to work well enough.