this post was submitted on 06 Jul 2025
144 points (98.0% liked)

3DPrinting

18896 readers
74 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
 

If you wanna print it yourself, the model is here: https://www.printables.com/model/1348194-4n-threaded-flat-head-screws-and-nuts-10-32-equiva

Design to be a drop in replacement for 10-32 screws with a much, much higher pitch. These screws are extremely easy to print, is reliable enough that it can hold some weight.

If you wanna print this yourself, you need to make sure that the screw is sideways, so if it breaks it's no on the layer lines.

Using them in my own prints which had metal screws and they are holding quiet well.

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 8 points 4 days ago (3 children)

I mean, theorerically, but a phillips screw is much less complicated and easier to print bc less overhang

[–] [email protected] 24 points 3 days ago

Robertson is a square. Rotate it 45 degrees and it has no overhangs at all.

[–] [email protected] 7 points 4 days ago (1 children)

And given the lack of strength in these screws, cam-out is likely a positive (which is what the Phillips what's designed to do).

[–] [email protected] 4 points 3 days ago (1 children)

Never in my dang life have I seen a Philips actually cam out. Either the screw strips or the driver strips.

Usually both.

[–] [email protected] 2 points 2 days ago

I've never seen a Phillips screw get stripped without first camming out a few times.