what's the one on the right?
Mildly Interesting
This is for strictly mildly interesting material. If it's too interesting, it doesn't belong. If it's not interesting, it doesn't belong.
This is obviously an objective criteria, so the mods are always right. Or maybe mildly right? Ahh.. what do we know?
Just post some stuff and don't spam.
I remember all the formats shown.
My first machine was an AST Research 286 16Mhz (in "turbo" mode) with two 5-1/4" floppy drives, and a 40 MB 5-1/4" hard drive. I paid ~$2000 for it in the late 80s. That was a good move, I knew more about computers than most people applying for jobs at the time, and that allowed me to make a decent living without a college degree.
Oldest hard drives I've dealt with were 4RU. Those systems also had me attaching reels of tape with write enable rings.
Is that NVME only half length still with a full TB? It almost looks to be the same size as an M.2 wifi adapter. Crazy that they're getting this small.
I recently bought two cheaper 1TB NVME and have some premium ones from several years ago but they're all the full 80mm length. I have yet to come across ones this small personally.
2280 seems to be the most common DIY size, 2230 is common for business machines, sometimes in an adapter to fit a normal 2.5" HDD bay or a slot large enough for 2280. I just removed one from the 2280 adapter last week to get data off after the storm came through the east coast.
The fact that those measurements are in inches when “2280” means 22mm x 80mm agitates me.
There's terabyte SD cards now, that are almost that fast.
I remember being astounded by the 8GB backup tapes that fit in my shirt pocket.
I started on 3.5" HDDs in the 90s. I am running 3.5" HDDs today. They are still the most cost efficient.
5MB of storage in 1956.
That would hold 1.66 copies of war and peace.
Once you have one copy on there it would be awfully wasteful to fill the rest up with a 0.66 copy though.
I think I have two I could put on the left side. A "full-height" 5.25 inch drive with 5 megabytes and a DEC removable disk platter assembly, somewhere over a foot in diameter and 8 to 10 inches high. I don't remember how much capacity that had. It was for a RP04 or RP06 drive.
And it will continue...
Soon we'll have 100TB "drives" the size of a thumb nail for 50€.
We'll all (we geeks anyways) walk around with the Wikipedia, all Star Trek movies and so on in our pocket :-)
The 1TB and up microSD cards blow my mind.
And they all last until about the same date
Ahh yes, I remember my first Seagate ST225. A whopping 20 MB of storage for the low low price of 800 bucks.
Do manufacturers use the extra space for larger batteries, or just to make the product smaller overall?
This is for desktop PC. But the correct answer is overall smaller because if you only had spinny drives a lot of small devices wouldn't be possible.
Yes.
It'd be gnar if the smallest one was also a magnetic platter hard drive.
The smallest old style hard drive I can think of is the iPod. But now I want to know if any magnetic platter drives got smaller than that... 🤔
Afaik, it's all been solid state after that. Even newer iPods.
Oh wow. I didn't even know that was a platter drive! I'm kinda glad I kept that thing.
ADORABLE AAAAA
It's so tiny! 😍
Omg it was made in 1998?! :O
Pulled from my Life drive :)
And further into the article: "Toshiba decided to skip the 1" form factor, and in March 2004 announced a 0.85" drive that shipped in September of the same year.[38] "
gnar
You made me think of GWAR
Gwar is pretty gnar.
As far as I'm aware 1.8" is the smallest form factor for mechanical hard drives.
Nope, they did make 0.85" ones. Here's someone taking one apart: https://m.youtube.com/watch?v=QB0KdAj54xg
It really is amazing, and just popping an m.2 into a motherboard directly is just so... easy. And I think Gen5s are what, 2.5x faster than what you're showing here?
The screw situation is finicky. It's a weird mix between you're supposed to have screws from your case/motherboard or sometimes the drive comes with one. But if you move stuff and drop the tiny tiny screw it's a hassle. Every motherboard should just have the little tab you just turn to keep it in place.
Plus the newer gen fast drives get hot so they need a heatsink. The fastest maybe need heatsink plus airflow. So then you need an extra fan if you don't have enough airflow which is easy because it's flush against the motherboard and sometimes blocked by the GPU.
Full agree on the screw situation, although my most recent mobi addressed that with a sort of... turnable plastic lock thing? And a built in heatsink and "shield" for the gen 5 and 4 ports, so I haven't had any issues with heat. I get the sense we'll have a better standard as time goes in though, Gen5 is really really new.
But even the gen 3s are lovely. Maybe I just hate SATA cables, haha.
In the compsci building at uni, there is a museum of sorts in the hall to the labs. At the beginning of the storage section, there is a 20Mb storage device. It is the size of a washing machine, I have no idea how much it weighs, but it has to be in the 100's of kg range.
Sitting on top are much more modern devices, 5.25"/3.5"/2.5" drives; I haven't been back for a decade to know if they kept going as tech improved.
"Sitting on top" is a brilliant way to display that.
Very effective.
The RAM section with the hand woven memory modules is so awesome. 1kb of RAM; tiny iron rings with fine copper wires threaded through them.
Having grown up along with the computer industry, sometimes I have that surreal sense of awe when I remember where we came from and what I used to consider cutting edge. Just upgraded my computer with a few SSDs, one an M.2, and before I put it in I was looking at it and trying to come to grasp with the scale of things (size and speed) vs. my first C-64 computer and Datasette. I know the numbers...they don't convey the difference in the head.