this post was submitted on 03 Dec 2023
4 points (100.0% liked)

3DPrinting

15276 readers
83 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
 

Got this email from Autodesk that Fusion is increasing their annual price by a huge amount. I subbed for 1 year a couple years ago for I think $380. Then I was able to get an educational sub after that. Fusion is still the cheapest CAD software out there, not including the free stuff like FreeCAD, but still, this price increase is massive.

It should be noted that it's still free to use for personal use minus the extra features.

top 15 comments
sorted by: hot top controversial new old
[–] [email protected] 0 points 9 months ago (1 children)
[–] [email protected] 1 points 9 months ago

It's such a bad piece of software I just don't get how people can use it...

[–] [email protected] 2 points 9 months ago

No, no - they're not raising the price; they're rebalancing it to reflect the value it delivers!!1!

And since they've reduced the free version functionality significantly, I believe I'm due a substantial rebate.

[–] [email protected] 2 points 9 months ago (2 children)

The problem is that there is no real competitor to fusion. If you think about usability/learning curve

[–] [email protected] -1 points 9 months ago (1 children)

Onshape has replaced fusion for me, was an easy switch.

[–] [email protected] 0 points 9 months ago (1 children)

Isn’t onshape for non-commercial only?

[–] [email protected] 0 points 9 months ago (1 children)

Non-commercial is the free version, with all your parts public.

They also have a pro license with a fee, where your parts are then private obviously.

[–] [email protected] 1 points 9 months ago

The pro license is like $2000 per year.

[–] [email protected] 1 points 9 months ago (1 children)

Yeah, I've used multiple CAD tools, from pro/engineer to F360, but the learning curve of freecad felt like a brick wall.

[–] [email protected] 1 points 9 months ago* (last edited 9 months ago) (2 children)

~~I got stuck on googling how to make a fillet in freecad, to which the answer appeared to be, "yeah, nah, you sort of can't". Oh okay, this program is not for me.~~

~~Edit: if people want to help/criticise, I recall the problem was that I couldn't do it parametrically, which is the only way I like to model any engineering parts. So far the only thing that information has gotten me is a downvote. If freecad is as full featured as you say, then this should be easy to do. Feel free to tell me how.~~

EDIT 2: after the info I got, I looked into it more and discovered my problem was a bit different - I couldn't do a parametric offset line in a sketch, because I needed to make a particular pattern. I ended up doing it with OpenSCAD if I recall. I apologise for saying freecad couldn't do fillets, that would've been extremely basic. It was still a very painful experience just to figure out that it couldn't do what I needed.

[–] [email protected] 0 points 9 months ago (1 children)

I don't know how long ago you tired this (early versions were, even I will admit, kind of crap) but in the current FreeCAD release of 0.22.1 it's incredibly easy.

Just select the edge(s) you want to fillet and and press the "fillet" button in the Part Design workbench...

And on the panel on the left you can set the radius. The profile of the Fillet tool is always a 90 arc of circle with the radius you've specified.

Or, if you want to get fancy and make your own bespoke custom fillet. Well, you can define its profile in a sketch. Here I just used a bezier to make an arbitrary curved shape. You are defining the profile of the material you want removed here, i.e. the negative space. You can make this as mathematically rigorous and precise as you like.

Then, position it somewhere on the vertex you want to profile and once again in the Part Design workbench, select that sketch, and hit "subtractive pipe."

From there, you can hit "add edge" to define which edge(s) you want it applied to. You get a preview of the material removed.

Et voila.

[–] [email protected] 1 points 9 months ago* (last edited 9 months ago)

I appreciate all the effort you went to, and I can do this as it turns out. Now that I've researched what problem I was having, it turns out the issue was that I couldn't do a parametric offset line in a sketch, which was crucial to what I was doing at the time, so I had to give up on it.

I was using 0.19 at the time, because that's what I've got installed.

[–] [email protected] 0 points 9 months ago (2 children)

whens the last time you used freecad? theres literally a button for making fillets.

[–] [email protected] 1 points 9 months ago* (last edited 9 months ago)

I honestly forget, it was such a terrible experience I didn't give it any more time. I think that the problem was that I couldn't make it parametric.

[–] [email protected] 1 points 9 months ago

I tried using Freecad as to filet something recently and it told me to look at the error console for more information, after googling for where the error console is, I realized the message to look at the error console was being output to the error console.

There was no more information to be had. It is a UX and functional nightmare, and it is what it is, but the downside is this means millions of engineers are being trained on subscription web sites, and eventually this will be used to both squeeze people for money, and also to prevent people from creating unauthorized or patented parts.