3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
Recently started trying Silk PLA filaments for the first time. This was printed with Eryonone Silk Rainbow PLA. The glossy sheen seems to come out well, but there is this odd banding/striping as the hue changes sometimes.
I've printed with several Eryone matte filaments and I haven't seen this. Could this be a defect with the filament, or do my settings for silk still need some work?
Though I've never encountered this I have heard that it can be caused by the fillament twisting on its way to the extruder. Maybe try makeing sure the fillament doesn't make any really twisty turns. Edit: ah wait I thought this was dual extrusion filement, nevermind
How does the sections of the filament with the hue change look?
Cool toilet bro.
You are talking about that blue stripe?
That far out from the transition I think thatust be a filament coloring error.
I don't see any way this is anything but a filament issue, it's not like your print head could print a layer after the layer on top of it...
fwiw, I've had similar issues with some multicolor filaments, I think sometimes they just aren't made quite right but still pass QA.
I assume that is because of the model you are printing and a bit because of the filament itself. Some layers seem to need more filament (top, bottom layers) then there might be infill and then there is the hollow part. The more filament per layer the faster the color transitions. I assum the darker red band towards the bottom is just part of the filament. If you want the smoothest transition you should print something that has pretty consistent layers like either something solid (infill is okay as long as it isn't something like adaptive infill) or a vase mode print.
I would definitely do some calibration with that pla. Silk pla can be tricky to print.