That's what they are saying. Buy a PEI plate with a magnetic backing, remove the rest of the abs from your glass build plate and stick the magnetic pad on it. Then the pei goes on top.
I did this as an upgrade to my own printer.
That's what they are saying. Buy a PEI plate with a magnetic backing, remove the rest of the abs from your glass build plate and stick the magnetic pad on it. Then the pei goes on top.
I did this as an upgrade to my own printer.
This is fantastic and I appreciate that it scales well on the server side.
Ai scraping is a scourge and I would love to know the collective amount of power wasted due to the necessity of countermeasures like this and add this to the total wasted by ai.
Box fan bearings are not typically designed to run in that orientation. It will probably run for a while before failing prematurely. Might make it a couple months or just a few weeks.
This is a much more robust fan and they come in various sizes to better fit your opening. They move a lot more air, and many styles come with a thermostat and speed controller. Sorry for the Amazon link, this is just the general style: https://a.co/d/bLeBCeD
You just stick the magnetic backing to the existing glass plate for flatness and rigidity. You might have to bump the heated temp 1 or 2 degrees to compensate for the additional thickness, and you may lose a couple of mm/s of print speed at the high end due to the additional weight. That said, it is a very cheap and easy to execute option.