People tweeting stuff. We allow tweets from anyone.
RULES:
I like smart tech, as long as I can make it work for me and not just another data vacuum for some faceless corporation. I've got Home Assistant handling a lot of my stuff now, and I'm moving things over to it and replacing corporate-app-only things with things that can work locally.
I'm interested in doing this also. Is there a guide you're following, or would recommend?
Home assistant has been on a push to be more user friendly. It's gotten quite good, over the last few years. It's not quite to mass deployment levels yet, but it's managed to wrap all the evil parts in easy to use interfaces.
The best bet, to play with it, would be a raspberry pi. There are premade images of home assistant available to install. Stick one on as SD card, and follow the prompts. You'll be amazed at what it can just find on your home network.
I will never use smart technology. I prefer analogue technology. Imagine using a subscription in your home for lights and TV and AC and heat and appliances and then boom, they decide to terminate your subscription and now your home is inaccessible for habitat.
Honestly I'm fine with smart technology. As long as I can homebrew it or something ;3
My rule for smarthome stuff is that it's self-hosted, and it has to have a low-tech way to use it. A light switch can be on Zigbee attached to my Home Assistant server, but it needs to function as just a light switch when the network is down.
Have some old stuff that doesn't follow these rules, but I'm slowly replacing them.
I recently bought a zigbee dongle to use with a home assistant VM. Do you have any advice on products? There is alot of stuff out there and I am trying to make sure I get good stuff.
My current plan is that id buy assorted types of lights to fill the roles of actual lighting and mood lighting, and I would pair that with a 4 button switch to toggle between some different presets. Been looking at Moes for the scene switch buttons and Sengled bulbs, and still need to find a solution for having home assistant to turn on or off non-smart items by delivering power or withholding, but i feel like i am flying blind.
There's the Sonoff ZBMINIR2 device. You install it between a physical switch and the wiring, and then tuck it into the electrical box. It has three different modes:
I have a couple, and they're great. They just don't support dimming.
I mostly use the Enbrighten Zigbee Dimmer. Its dimming function sucks--you have to hold the paddle down until it's around the setting you want--but otherwise it works pretty well.
IKEA has a lot of cheap, yet quality stuff you can use. The best thing for me is that they are nearby, and things like switches and buttons are super cheap.
Are you using home assistant? Their website says ikea switches arnt compatible with it.
Ikea smart home stuff uses Zigbee, and just about all of their devices are supported in Home Assistant, either with ZHA or, better, zigbee2mqtt. I have dozens of buttons, bulbs and sensors from Ikea and they are very reliable most of the time.
I'm running ZHA at the moment, but some of my devices (mainly the plant humidity sensors) keep falling off the zigbee network for hours at a time. I've heard zigbee2mqtt resolves a lot of issues with ZHA, would that have any effect?
All fun and games when a grey hat hacker "hacks" his way into your living room through your window and starts turning on your lights without your permission.
And someone could throw a brick through my window and take all my stuff. There are some threats that we take care of by having a society where people don't break other peoples things just because they can.
Usually it's due to fear of repetcussions, but now anyone in a MAGA hat can throw bricks through your window and take all your stuff whenever they want
All fun and games until you get a power outage and one of your nodes doesn't boot properly which means no quorum to start HAOS which means no lights
But that's what flashlights are for :p
That's why my HAOS instance runs on bare metal 😁 (Lenovo M710q, G4560T, 4GB RAM)
I've had my Phillips hue bulbs for over 10 years now. I own like 20 bulbs and have only had a single failure. Never had any issues with the bulbs. Google Assistant however has let itself go.
I bought Ikea bulbs and the only time I've ever had an issue with them is after a brownout nuked the gateway/hub device.
If you let the wireless remotes run out of battery you have to re-sync them, but beyond that they're the easiest IoT thing I've ever used.
Google home assistant has gone to total shit. That new Gemini crap will not recognize commands the the old assistant has no issues with
Yea is Alexa any better than Google Assistant? It used to be great but I think they are actively making it shit to get people on Gemini? But Gemini doesn't support smart home stuff, that why the hell do we need an LLM for assistant.
We've got a few Echos, but these days they are mainly used as a bluetooth speaker (bedroom), kitchen timer (kitchen), and the kids' one (basement) is used for music... and that's about it.
I have one in the garage, too, but I'm about to throw it against the concrete floor and run it over a few times for how often it only plays one fucking song from my Spotify playlist when I'm working on my motorcycles.
"it just works!"
I've had a similar setup, and bluntly, their not the brightest bulbs, and they're not the best bulbs, but they are one of the easiest to set up and get working. They mostly just fire and forget....
I hate the saying "it just works", but hue, despite all of its shortcomings, just works.
I've had at least one bulb fail outright, started illuminating "white" as an off purple color? It's hard to describe. I have no idea why, but that went into the bin. I also had one bulb that was in-between uses, fall and smash, I think it still works but it has sharp glass on it, so that's probably going to the bin. I have one other bulb that's failing right now... This one is... Different. It blinks. You'll have it at a steady, full brightness (or whatever) and the bulb will just shut off for 1/10th of a second every few seconds. No idea why. It's probably headed to the bin. Luckily it's in my hallway, so I don't see the problem most of the time.
They're expensive, and you don't get a lot of light per bulb considering what you pay for them, but they are easy. That, in and of itself, would be the main reason I would suggest to anyone who isn't a complete nerd, to get hue. Anyone with enough technical prowess and the willingness to set up home assistant, should probably go to different options. Anyone too busy to bother with their lights and just wants something that they can control with their Google home/Alexa/Siri.... Hue is a good option.
Not saying there aren't other good options, but hue is the one that I know and would suggest.
their not the brightest bulbs, and they're not the best bulbs,
There is a joke there somewhere
How’s the security on those light bulbs is a weird but valid question
I had issues with it from the get go. It wouldn't accept my pairing, it was blinking on and off all the time, etc. I threw it out as soon as I didn't need it for a couple of hours. Why do they need so much info to run a bulb?
I think hue works so well because it's based on the ZigBee standard and the hub which is a dedicated appliance for controlling the lights. WiFi and Bluetooth should be reliable but with cheap lights maybe that's the issue.
The only "smart" light fixture I have has its own separate remote for switching between modes and adjusting light. I will never buy a device that either needs Bluetooth of Wi-Fi.
Most of the best globes run on ZigBee or equivalent!