3D Printing

4351 readers

1 users here now

For everyhting 3D printing related.

Please be excellent to each other :)

Icon by Freepik, Banner photo by Thiago Medeiros Araujo

founded 4 years ago

MODERATORS

[email protected]

What's the maximum layer height for consumer printers? (lemmy.ml)

submitted 8 months ago by [email protected] to c/[email protected]

9 comments fedilink hide all child comments

What's the maximum layer height I can achieve on a consumer 3D Printer?

I'm using a bambulab a1 mini more specifically but I'm interested in all answers to that question.

Personally, I think the look of the extrusion can be quite nice if it's not trying to be hidden – especially with transparent PETG or something similar.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 0 points 8 months ago* (last edited 8 months ago) (1 children)

Did you buy a large diameter nozzle? If yes, you'll be bound by the performance of your heating block and how much the extruder can feed in. I think a general rule of thumb is about nozzle diameter. A bit less if you want a clean print. The standard nozzle diameter of lots of printers is 0.4mm.

[–] [email protected] 0 points 8 months ago

I haven't bought anything yet, it's just a project for the future. The maximum nozzle diameter I found for the printer is 0.8mm. It's probably the maximum recommended nozzle diameter for the printer...

When asking GPT – as you say – it says you'll have to go under the diameter of your nozzle: "The maximum layer height is typically 75-80% of your nozzle diameter" That means I could print with a layer height of 0,64mm. Unfortunately I think that's still too small.

I'll have to check the performance of my printer and do additional research to tell how much my printer can extrude and if I can find or produce the right nozzle for my printer (maybe I can drill a hole with a larger diameter in the nozzle?).

Thank you!