Wuuttup. I'm here complaining again about Framework's Linux unfriendly display. The new one this time.
https://frame.work/products/display-kit?v=FRANJF0001
Old display, 2256 x 1504 (3:2)
GNOME
100% scale
- Nothing looks blurry
- Everything is tiny
- Unusable
100% scale + large text accessibility
- Nothing looks blurry
- Most apps scale appropriately
- Some apps don’t respect GNOME’s large text setting (Alacritty)
125% scale
- Most apps look blurry (Picard, Firefox, Spotify, Alacritty)
200% scale
- Everything is way too big
- Unusable
Plasma
100% scale
- Nothing looks blurry
- Everything is tiny
- Unusable
125% scale + Apply scaling themselves
- Nothing looks blurry
- Most apps scale appropriate
- Some apps can’t scale themselves and look tiny (Picard)
125% scale + Scaled by system
- Most apps look blurry (Picard, Firefox, Spotify, Alacritty)
200% scale
- Everything is way too big
- Unusable
New display, 2880 x 1920 (3:2)
GNOME
100% scale
- Nothing looks blurry
- Everything is tiny
- Unusable
100% scale + large text accessibility
- Nothing looks blurry
- Most apps scale appropriately
- Some apps don’t respect GNOME’s large text setting (Alacritty)
- Everything is tiny
150% scale
- Most apps look blurry (Picard, Firefox, Spotify, Alacritty)
200% scale
- Everything is way too big
- Unusable
Plasma
100% scale
- Nothing looks blurry
- Everything is tiny
- Unusable
150% scale + Apply scaling themselves
- Nothing looks blurry
- Some apps can’t scale themselves, but look a little better here? (Picard)
150% scale + Scaled by system
- Most apps look blurry (Picard, Firefox, Spotify, Alacritty)
200% scale
- Everything is way too big
- Unusable
tl;dr
In the old display, GNOME at 100% + large text was the best compromise. In the new display, Plasma at 150% + Apply scaling themselves is the best compromise.
Interestingly, Picard scaling itself looks super tiny in the old display, but in the new display it looks... better. It's still not correctly scaled like native Wayland apps, but it's better.
Warning
If you can't stomach moving from GNOME to Plasma, then 🚨 DO NOT BUY THE NEW DISPLAY 🚨. The new display is worse for GNOME.
Once again
I am once again begging Framework to just give us a damn regular DPI display that works! Without workarounds. Without forcing users on specific DEs. Without forcing users to stop using their favorite apps. This new display has basically all of the flaws as the previous one.
Bottom Skinner is right, though. It's 2024. HiDPI has to be supported by all toolkits, desktops, and applications at this point. There are no excuses. Even 1080p on a 14" laptop screen warrants 125% scaling, IMO.
🤣on 14” 1080 i would need 50% scaling to make it usable for me, since I can not work with such a tiny space for my apps.. You can’t even use two apps side by side on 1080 these days, since everything is designed for higher DPI.
And even on 100% is the font so blurry that it is hard to read. Got do I hate 1080p 🤣🤣
Everything I use needs high DPI like 2k to 3k on 14” - 16”, everything bigger needs at least 4k
I get needing more space for certain workflows but if fonts are blurry on 1080p at 100% there's something wrong with your setup. Misconfigured font renderer or so. Configure your FreeType to set font smoothing to sharp and hinting to slight. If your distribution has other defaults, file a bug report with them. Back in the day when screens had a lower pixel density (I had 15" 720p once), FreeType might have been configured "smoother" because it would match print output closer.
I have no Linux on any 1080 screen.. There were a test laptop With 1080p in my office (windows) and we still have some 1200p screen in use (I avoid them)
The Font is definitely why better readable on 4k, even at half the size compared to 1080p
I mean... yeah, I agree. Would you mind sending that email to the millions of devs around the world? Not sure if they're aware of this.
I just want to be able to read my screen. 😭
Yes, I mind. For Qt5 applications, basic HiDPI support can be patched in with a single line. I actually did that for a handful of applications, tested them, and then submitted pull requests on Github. I cannot program, so all I could do is to copy and paste that one line from the Qt documentation. It's not much but I already did my part.
"This hardware works fine and even has compatible software that it works great with. But I'm going to prefer the broken software for other reasons. And that means it's the hardware's fault."
Software that is built to be compatible with a wide variety of hardware should be compatible with a wide variety of hardware.
If software can't handle a 16.5:16 aspect ratio, then that's bad software. I don't care how weird of a niche thing that is... just make your software abstract enough to handle those cases.
It's 2024, any resolution/aspect ratio/DPI combo should be supportable. There's enough variety of monitors out there that we should have a solution for handling things on the fly without needing to have a predefined solution.
Scaling for HiDPI displays is unacceptable on every desktop OS, it is crazy that so little effort has been put into making the experience of modern monitors good.
I've had most stuff look good with Plasma 6. But not perfect.
I've found that it's mostly ok at some settings but less so at others. As in it will display well at 125% but not necessarily at 135%.
I feel this is one of those few sectors, like wifi compatibility, where Windows completely destroys Linux, MacOS, and BSD. As someone who regularly switches between operating systems on bare metal & 4K, trying to use a HiDPI display on *nix is painful and will only kinda work with caveats after 100 hacks (as seen here), whereas Windows has a zoom slider that just works.
Interesting, as someone running 4k, p1440, and a 1600x1200 three monitor setup, this makes me nervous about switching.
I never even considered Linux having scaling issues in 24'
macOS seems to handle this pretty well, honestly. About the only issue I have is XQuartz and even it’s pretty good.
What’s the issue you’re seeing?
Scaling, MacOS has no actual scaling it will only lower the resolution, and using Retina on anything that isn’t sold in an Apple store (and even then) just simply does not work. It essentially has no HiDPI support past using native resolution with slightly larger text that is not adhered to by most of the operating system itself. I am at a loss at why you think this is well handled, what criteria are you using?
What the hell are you talking about? You are completely wrong on this. macOS has had high DPI support since 2012, when the first Retina display Macbook Pro came out. Applications bundle 1x and 2x sized assets, and fractional scaling is achieved by shrinking the 2x upscale back down to match the selected fractional scale.
I'm surprised to be learning this, but I've never tried to use a non-Apple HiDPI display with my Macs. Weird that it works so well on the HiDPI built-in displays and their external displays, but won't bother to make it work right with non-Apple displays.
Am I crazy or are you just completely wrong?
https://github.com/waydabber/BetterDisplay/wiki/MacOS-scaling,-HiDPI,-LoDPI-explanation