3DPrinting

15534 readers

51 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

[email protected]

Horrible underextrusion (sh.itjust.works)

submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/[email protected]

9 comments fedilink hide all child comments

Hey. A couple weeks ago I got my old ender 3 pro out of the basement and have been trying to get a decent print with it ever since. I managed to print out one benchy without issue, but ever since then every print I do would be plagued with awful underextrusion.

I've replaced a few parts, including the hot end and the nozzle, and even did this one hack someone suggested where you put a piece of PTFE tubing in the hotend, but no matter what the issue persists. My thought was it might be the creality filament I ordered, so I ordered a spool of hatchbox filament. But the problem ended up being worse on the hatchbox filament. I've put both in a filament dehydrator but it's made no difference. Both spools have tough sections along them that don't seem to melt as easily when I pull them out of the extruder, so I'm thinking that might have something to do with it.

Turning the print speed down and increasing the flow and temperature yielded better results, but it was still underextruding on every other layer.

I want to know if there's something I can or should do before I just give in and buy another roll of filament. I've probably spent enough at this point to buy a better printer, but I guess that's sunk cost for ya.

Edit: SOLVED! I just forgot to tighten the extruder tension arm, now it's working perfectly. Thanks to @[email protected]

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 4 months ago* (last edited 4 months ago) (1 children)

The OG Ender 3 has about the shittiest cheapest extruder you can design. But it sounds like you've ruled that out.

Did you ever do the hotend PTFE fix? It's prone to clogging because the Bowden tube goes all the way to the nozzle and gets pulled out during retractions.

https://www.youtube.com/watch?v=Fb4XMbZ0iA4

[–] [email protected] 4 points 4 months ago

I did, yes.

I forgot to post an update but I found the source of the issue. Turns out I'm a dumbass and I accidentally loosened my extruder's tension arm.