TMP_NKcYUEoM7kXg4qYe

joined 1 year ago
[–] [email protected] 1 points 21 hours ago

mainly hobbyists or some very specific feature. For example antiX for old hardware or Spiral Linux for the better installer, gaming specific distros for gaming etc. Also there are protest distros which advertise not having something - usually SystemD.

[–] [email protected] 2 points 21 hours ago (1 children)

Don’t introduce proprietary crap just so companies can profit off of it.

I agree but I think it's the user who should be able to make the informed choice (ie. during installation)

[–] [email protected] 4 points 21 hours ago* (last edited 21 hours ago)

But flatpak also brings a lot of bloat. That's the point of these 2 formats. You are trading bloat for portability.

The question here is not which one but why not both[*]? Also the target audience for this distro doesn't know how to add repos, that's the point of it.

[*] the answer is that Snap Store has had malware in it multiple times but that could imo be solved by a disclaimer

[–] [email protected] 1 points 21 hours ago

This is highly unlikely. Snapd is open source so you can just repackage the software for your distro of choice. I don't think giving users the ability to use both Flatpak and Snap is bad. Though I would put Snap behind a disclaimer due to Snap Store's history.

[–] [email protected] 1 points 21 hours ago

it's actually the other way. Canonical has had troubles policing Snap Store from malware

[–] [email protected] 1 points 2 weeks ago (1 children)

in case you have not solved it, it's easy on Sway. man sway-output (kinda) tells you how to do it. Here's an example sway config line:

output HDMI-1 res --custom 1921x1081@61Hz

You can even change CRT timings like front porch, if you want that.

[–] [email protected] 49 points 2 weeks ago* (last edited 2 weeks ago) (10 children)

Don't worry, the whole thing is that GNU boot contains proprietary firmware for testing coreboot. The only distros affected are GNU Boot and Canoe Boot. Upstream coreboot has that testing firmware there intentionally so it's silly to call it "affected".

FSF is doing great stuff for the world but I think FOSS is kinda held back by being led by nerds that are "a bit different". (edit: I mean that with respect. These nerds are surely nice people and great coders but imo not great philosophical leaders)

[–] [email protected] 10 points 2 weeks ago (1 children)

It's pretty good with adaptive sync and nVidia Reflex otherwise it's terrible. Reflex seems to work on linux too so I guess single player linux gamers will be happy.

Useless blabbering incoming: With that said I am a proud frame generation hater. On its own it effectively halves your frame rate even though the frame counter will say that it doubled it. With Reflex the latency is not "that bad" but still I don't get why anyone would want that. The reason I want more frames is better responsiveness. I cannot really tell the difference between 60 Hz and 120 Hz video. I've seen Avatar 2 at high refresh and did not really notice anything (other than that the movie sucked). But I can tell that my mouse feels like it's sliding on jelly.

Obviously it's great for the people that like it. I won't be like the wayland dev who blocked the tearing protocol (aka. just allowing frames to show on screen as soon as they are created) because did not use it.

[–] [email protected] 2 points 2 weeks ago

Ok thanks for the reply. I will try that. I probably should have noticed the "this branch is 7 commits behind" notice lol.

 

Does anyone know how to set a custom mouse acceleration curve on Sway? man sway-input does mention mouse acceleration but unfortunately it's one of those "you won't learn anything new unless you already knew it before" type of manpage.

I also found this project https://github.com/N-R-K/leetmouse which I will probably use in the end but I would also like to hear if anyone of you has any experience with custom acceleration profile, in case there is a better way or whatever.

Edit: I will use leetmouse (different branch tho), because libinput's acceleration is not very good for gaming (see comments for sources)

https://github.com/systemofapwne/leetmouse

[–] [email protected] 1 points 1 month ago

What do you mean by not being arrested? I would say German police putting a black bag on your head and taking you to their station in the middle of the night is something one could consider an arrest.

[–] [email protected] 2 points 1 month ago

I mean their August 2023 blog post was basically "We were busy, sorry for not posting updates." So considering you can still normally buy and receive a product from them, they are probably busy again. (or don't want to write blog posts) Which doesn't mean Pine64 is dead, just that you won't get updates.

Imo it's good that they aren't releasing another useless product but it's a shame that the Pine Note isn't available for purchase now that it has matured. Would have been such a cool device.

[–] [email protected] 4 points 1 month ago (1 children)

I think you are confusing "making another fedora fork for a laptop brand" with "porting a booloader to the device" or "writing a driver for the screen". Simply put you would not be able to use the hardware without the software. Outsourcing it to the community makes the hardware cheaper but the sideeffect is that the software will be crappy even after years of development. For some reason people aren't very keen on writing the low level stuff.

If you compare the Espruino smart watch to the Pine64 smartwatch, it's a night and day difference. My guess is that it's because Espruino handles the low level stuff and let community do the fun stuff, while Pine64 leaves everything on the community. Imo you need a fulltime developer who actually spends time looking in the datasheet and figuring out, how to properly put the PineTime to sleep, not just people who peek into the docs every Saturday.

 

My issue is that many of my remote desktop apps require knowing the IP adress of the other PC. I'm looking for a VPN that auto-discovers other devices on the same network. That way I could just "ssh" into the same IP every time, because it would be IP inside of a virtual network. Ideally I am looking a solution that does not require internet connection.

Thanks.

Edit: I should probably specify my usecase. I have a portable desktop and use VNC from a laptop to connect to it. To do that I need the IP of the desktop but that's different on a different network. This can be solved by using hostname.local as the "IP". (hostname is the "ubuntu" in "bob@ubuntu$:~/Documents") The solution is quite simple, I just haven't known about it.

 

Edit: Solved according to this: reddit Obviously Void has no systemd service but I just created a script service containing a single line isdv4-serial-inputattach /dev/ttyS0 --baudrate 19200. The serial communication often crashes but runit automatically restarts it so that's fine. Also 6.6 kernel is kinda buggy but 6.10(custom compiled) and 6.1(from void's repo) work fine. Yeah and don't forget to enable the ttySx service otherwise it cannot work.

I cannot get sway to detect my tablet device on Void Linux installed on a Thinkpad X200 Tablet. Anyone knows how to fix it? I have both libwacom and xf86-input-wacom installed. It worked fine on Debian.

Now when I think about it, I don't have libwacom-32bit installed, because I'm using musl library which is 64bit only. That might be the issue considering how old my hardware is. I'm going to try to investigate but I'm going post this here anyways in case anybody knows more than me.

 

The manual mentions that by default you can pan by holding middle click but my tablet does not have one, so I would like to change it to left click. Anyone knows how to do it? Thanks.

 

Edit with solution: I'm dumb. Just use the default quickemu settings and only change "-device virtio-gpu-gl " to "-device virtio-gpu " and "-display sdl,gl=on " to "-display sdl,gl=off ". Although qemu will have a lot of overhead at boot, the CPU usage when on the desktop should not eat your linux host's entire core. I also disabled Windows Defender, which I don't recommend if you run random stuff from the internet (or open .xlsm spreadsheets), but it helps. I ran CTT's windows debloat tool and removed edge because it was updating in the background for some reason. Even then Windows is still a last resort kind of machine when my desktop isn't available, not an actual work OS.

Edit with solution 2: The above still sucks compared to using RDP. Use the above to set up Windows Remote Desktop, then use for example Gnome Connections to RDP into it. I had to forward the RDP port to the Windows VM for it to work.

I changed the line

-netdev user,hostname=Quickemu,hostfwd=tcp::22220-:22,id=nic \

to

 -netdev user,hostname=RDPWindows,hostfwd=tcp::22220-:22,hostfwd=tcp::3389-:3389,id=nic \

Then I just connected to 127.0.0.1 from Gnome Connections

=======ORIGINAL POST:

Hi, I have trouble running Windows 10 in QEMU on an old af thinkpad x200t. The issue is that it that my GPU only supports opengl 2.0, so virtio does not work. The best I could do is use these options:

-vga qxl \

-device virtio-gpu \

-display sdl,gl=off

and like 30 more which are part of the default quickemu configuration. The three mentioned are ones I changed.

With these options QEMU uses "just" 85% of my CPU so I can still do something on the linux host. The issue is that Windows is basically unusable because the one core it has is constantly occupied by rendering graphics even when just idle on the desktop.

At this point I have accepted my faith that this laptop ain't usable for Windows virtualization but I thought that I would ask here before closing this case. So does anyone have a secret hack which makes pre core i series intel GPUs work with Windows guests in QEMU?

thanks for any tips

view more: next ›