this post was submitted on 20 Oct 2024
21 points (88.9% liked)

Climate - truthful information about climate, related activism and politics.

5244 readers
307 users here now

Discussion of climate, how it is changing, activism around that, the politics, and the energy systems change we need in order to stabilize things.

As a starting point, the burning of fossil fuels, and to a lesser extent deforestation and release of methane are responsible for the warming in recent decades: Graph of temperature as observed with significant warming, and simulated without added greenhouse gases and other anthropogentic changes, which shows no significant warming

How much each change to the atmosphere has warmed the world: IPCC AR6 Figure 2 - Thee bar charts: first chart: how much each gas has warmed the world.  About 1C of total warming.  Second chart:  about 1.5C of total warming from well-mixed greenhouse gases, offset by 0.4C of cooling from aerosols and negligible influence from changes to solar output, volcanoes, and internal variability.  Third chart: about 1.25C of warming from CO2, 0.5C from methane, and a bunch more in small quantities from other gases.  About 0.5C of cooling with large error bars from SO2.

Recommended actions to cut greenhouse gas emissions in the near future:

Anti-science, inactivism, and unsupported conspiracy theories are not ok here.

founded 1 year ago
MODERATORS
 

Honestly this is why I'm so into the idea of airless tires. Everyone just happily ignores this waste and I don't get it

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 17 points 4 weeks ago (1 children)

How do airless tyres change the pile of waste? They still wear out and I suspect become economically unviable and are disposed of.

It's not like we can't recycle "normal " tyres today, it's that we don't.

The reason is that there's no economic incentive to do so (yet), and airless tyres don't do anything to change that as far as I know.

[–] [email protected] 0 points 4 weeks ago (3 children)

They don't wear like traditional tires. At some point I'm sure planned obsolescence will creep into the design process, because capitalism. But as they stand, they're one set of tires for the lifecycle of a vehicle.

[–] [email protected] 3 points 4 weeks ago

Lol, The life of a typical American vehicle is about 16 years...

https://en.m.wikipedia.org/wiki/Car_longevity

[–] [email protected] 4 points 4 weeks ago (1 children)

Airless tyres are generally less efficient with regards to rolling resistance though, right? How does the wasted energy compare to the reduction in replacement rate?

[–] [email protected] 6 points 4 weeks ago (1 children)

Actually, the manufacturers claim the opposite:

About 90% of energy loss from tire rolling resistance comes from repeated changes in the shape of the tries as they roll. By simplifying the structure of the tire, Bridgestone was able to minimize the energy loss in these “air free concept tires.” As a result, these tires have the same level of low rolling resistance as Bridgestone pneumatic fuel efficient Ecopia tires, contributing to reductions in CO2 emissions.

https://www.bridgestonetire.com/learn/tire-technology/airless-concept-tires/#

[–] [email protected] 5 points 4 weeks ago (1 children)

I see. Is price the current limiting factor, in that case?

The reason I'm asking is that if this is actually true and ready for deployment, it would be adopted by every single competing cyclist in the world - they are crazy about managing efficiency and removing the possibility of getting a flat would be even more valuable.

Hence there's something missing, however I don't know what.

[–] [email protected] 1 points 4 weeks ago* (last edited 4 weeks ago) (1 children)

Probably it's the missing possibility to tweak the stiffness or rigidity according to ones special demands. An air filled tire offers this possibly to adjust the driving behaviour by elevating or decreasing the pressure. These airless tires don't, which is good for a car driven on road, but isn't for bikes where the setup is usually adjusted to the demands of the driver.

[–] [email protected] 1 points 4 weeks ago (1 children)

I'm not entirely convinced of this being the case. Adjusting tyre pressure is something that is always looked at quite seriously by pro cycling teams, but it's not going to be something that would be impossible to overcome by just buying several more tyres to have the desired range of properties available for the conditions of any given race.

Regardless, this will be an interesting space to follow in the future.

[–] [email protected] 1 points 4 weeks ago* (last edited 4 weeks ago)

Ah, OK. I was more thinking of mountain biking and related stuff. I didn't know that punctuation of tires still is a thing in (street) cycling.

However, I assume an airless tire for biking should have the same round cross section like an air filled bike tire, while the car tires both have a rectangular cross section. Thus the tires for biking need to be constructed differently. The one I've found is from Schwalbe and is basically a usual tire filled with a PU having a similar stiffness than a common tire with an air pressure of 3.5 bar. Currently, they don't have a system for racing yet.

[–] [email protected] 14 points 4 weeks ago* (last edited 4 weeks ago) (2 children)

https://aecbmesvcm.cloudimg.io/v7/https://cxf-prod.azureedge.net/b2c-experience-production/attachments/cld1iikkw161g01lli037rnr0-prototypewheels04-bkgd.max.jpg

Do you mean tires like this? Why shouldn't it wear the same way like a common tire with air?

[–] [email protected] 2 points 4 weeks ago (1 children)

Ask Michelin, it was in one of the videos. Maybe the composite they're using is more resilient.

[–] [email protected] 7 points 4 weeks ago* (last edited 4 weeks ago)

https://michelinmedia.com/michelin-uptis/

The only benefit regarding wear is that an airless tire obviously cannot be operated with impropper air pressure and thus, the assumed 8 % tires that are replaced due to uneven wear caused by wrong pressure could be saved.

[–] [email protected] 9 points 4 weeks ago

Agreed with sucessfuls evaluation. Once the outer layer gets eroded, same as every tyre, what's left can't be good for any grip.