Free and Open Source Software

19544 readers

43 users here now

If it's free and open source and it's also software, it can be discussed here. Subcommunity of Technology.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

[email protected]

Looking to get a used router for use with libreCMC (slrpnk.net)

submitted 4 days ago* (last edited 3 days ago) by [email protected] to c/[email protected]

13 comments fedilink hide all child comments

I'm looking to get a used router on which to install libreCMC, but the list of supported hardware is quite short. I'd prefer to find something locally, and I doubt that I'd be able to find these particular models. However, I do not intend to use WiFi at all, so I wonder, are there any more recent routers that work 100% with libreCMC except for the WiFi? Preferably something with at least 4 Ethernet ports.

Thanks!

EDIT: What I want to know is which routers do not require any non-free firmware for any of the hardware other than the WLAN. Does anyone know of where to find such information, or how to tell based on the specifications of a router that has not actually been tested with libreCMC?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 5 points 4 days ago (2 children)

No need, and it's just easier to secure that way.

[–] [email protected] 1 points 3 days ago (1 children)

You.. Don't have a smartphone? Or tablet.. Or laptop? I mean, I also have ethernet ports everywhere in my home and use those most of the time, but wifi sure is nice

[–] [email protected] 2 points 3 days ago (1 children)

I have a laptop that I use at the desk next to where I will put the router, and any network-attached storage will also be right there next to the router, so I have no need for WiFi. It's fine if the WiFi could work of course, but I wouldn't use it, and I imagine that many routers would be 100% compatible with libreCMC if not for the WiFi requiring non-free firmware. What I want to know is which routers these are that don't require any non-free firmware for any of the hardware other than the WLAN.

[–] [email protected] 1 points 3 days ago

I'm sorry, I don't know about routers that much. Here in France you cannot really use another router than the one provided by your ISP

[–] [email protected] 2 points 4 days ago (1 children)

You can just run Openwrt or Tomato and turn off the wifi.

[–] [email protected] 2 points 3 days ago (1 children)

I don't want to run Openwrt or Tomato precisely because they include non-free firmware blobs in order to support the ac/ax WiFi chipsets, and I don't want to spend the time and effort figuring out how to remove those when the developers of libreCMC have already done that.

[–] [email protected] 1 points 3 days ago

Gotcha.