PC Master Race

14955 readers

1 users here now

A community for PC Master Race.

Rules:

No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful. Everyone should feel welcome here.
No NSFW content.
No Ads / Spamming.
Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.

Notes:

PCMR Community Name - Our Response and the Survey

founded 1 year ago

MODERATORS

[email protected]

RAM: higher capacity vs higher speed (lemmy.world)

submitted 3 months ago by [email protected] to c/[email protected]

18 comments fedilink hide all child comments

I am going to upgrade my 8gb desktop pc. I have 2 free slots and 2 slots with 2x4gb 2400Mhz. I will buy 2x8gb with 3600 MHz. Should I put them together and have 24gb at 2400Mhz or should I remove the 2x4 in favor of the 3600Mhz.

I'm asking because I read that when you have 2 different ram speeds it will default to the lower one.

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 0 points 2 months ago

For my applications, quantity is better. Since I do CAD work in addition to 3D scanning with only occasional gaming, I need the capacity.

While I am 3D scanning, I can use in upwards of 30GB of RAM (or more) in one session. CAD work may be just as intensive in the first stages of processing those files. However, I wouldn't consider that "typical" use for someone.

For what you describe, I doubt you will see much of a performance hit unless you are benchmarking and being super picky about the scores. My immediate answer for you is quantity over speed, but you need to test and work with both configurations yourself.

I don't think I saw anyone mention that under-clocked RAM may be unstable, in some circumstances. After you get the new setup booting with additional RAM, do some stress tests with Memtest86 and Prime95. If those are unstable, play with the memory clocks and timings a bit to find a stable zone. (Toying with memory speeds and timings can get complicated quick, btw. Learn what timings mean first before you adjust them as clock speed isn't everything.)