spacemanspiffy

Why doesn't this exist?

Take dried beans, roast 'em, grind 'em, and brew some bean juice?

I have no idea if it would taste good or not, but we don't know if we don't try.

Edit: I need to see what dried beans I have and maybe go shopping. I will give this a try with a couple different types of beans and report back if I fart or not.

cross-posted from: https://lemmy.world/post/15144957

Can anyone help me figure out Frigate/go2rtc

I have two cameras in Frigate.

One is a Raspberry Pi 3 running Monocle server, and this stopped working in Frigate some time back (driveway). The second is a Galayou G7 (nursery). The nursery camera is the one I am concerned about with this post.

Problem: Up until a month or two ago (I must have ran an update but I don't know) the audio from the Galayou camera worked in Home Assistant. I'd like to get that working again. Some searching led me to try setting up go2rtc in my config.

Here is my config before making any changes:

mqtt:
  host: 192.168.1.10
cameras:
  nursery:
    ffmpeg:
      inputs:
        - path: rtsp://redacted:[email protected]:554/live/ch1
          roles:
            - detect
    detect:
      width: 1280
      height: 720
  driveway:
    ffmpeg:
      inputs:
        - path: rtsp://192.168.1.240:554/recording/7824851880350319106/replay?trackid=8836591
          roles:
            - detect
    detect:
      width: 1920
      height: 1080

This currently provides only jsmpeg video in Frigate. If I add something like this to the end:

go2rtc:
  streams:
    nursery:
      - rtsp://redacted:[email protected]:554/live/ch1

this adds mse and webrtc as options in Frigate. But, mse plays only video, no audio. And webrtc loads neither audio nor video. I have tried adding lines like - "ffmpeg:nursery#video=h264#audio=aac" and also with opus but to no avail.

Finally, if I ffplay rtsp://redacted:[email protected]:554/live/ch1 it loads audio/video without a problem. I'm also able to connect via ONVIF at onvif://192.168.1.241:8899 from onvif-gui.

So, something is wrong in my Frigate config, and I don't know what. I'm hoping someone here is a little more familiar and can give me a pointer or two here?

Update: Here is the fix, in case anyone comes across this later:

go2rtc:
  streams:
    nursery:
      - "ffmpeg:rtsp://[email protected]:554/live/ch1#video=copy#audio=copy#audio=opus"
  webrtc:
    candidates:
      - <server-ip>:8555

The webrtc section got webrtc to work in the Frigate and video back in HASS. The #audio=copy#audio=opus got audio working in webrtc.

I have two cameras in Frigate.

One is a Raspberry Pi 3 running Monocle server, and this stopped working in Frigate some time back (driveway). The second is a Galayou G7 (nursery). The nursery camera is the one I am concerned about with this post.

Problem: Up until a month or two ago (I must have ran an update but I don't know) the audio from the Galayou camera worked in Home Assistant. I'd like to get that working again. Some searching led me to try setting up go2rtc in my config.

Here is my config before making any changes:

mqtt:
  host: 192.168.1.10
cameras:
  nursery:
    ffmpeg:
      inputs:
        - path: rtsp://redacted:[email protected]:554/live/ch1
          roles:
            - detect
    detect:
      width: 1280
      height: 720
  driveway:
    ffmpeg:
      inputs:
        - path: rtsp://192.168.1.240:554/recording/7824851880350319106/replay?trackid=8836591
          roles:
            - detect
    detect:
      width: 1920
      height: 1080

This currently provides only jsmpeg video in Frigate. If I add something like this to the end:

go2rtc:
  streams:
    nursery:
      - rtsp://redacted:[email protected]:554/live/ch1

this adds mse and webrtc as options in Frigate. But, mse plays only video, no audio. And webrtc loads neither audio nor video. I have tried adding lines like - "ffmpeg:nursery#video=h264#audio=aac" and also with opus but to no avail.

Finally, if I ffplay rtsp://redacted:[email protected]:554/live/ch1 it loads audio/video without a problem. I'm also able to connect via ONVIF at onvif://192.168.1.241:8899 from onvif-gui.

So, something is wrong in my Frigate config, and I don't know what. I'm hoping someone here is a little more familiar and can give me a pointer or two here?

https://www.amazon.com/dp/B07RR9XBXJ?ref=ppx_yo2ov_dt_b_product_details&th=1

I ordered one of these a few months back.

Then I installed it.

Then I realized that this wasn't the same Zigbee Dimmer switch I was already using elsewhere, and that this wouldn't work for me :)

It's now past the return window for Amazon. I have zero use for this.

tl;dr - Me dumb. If you live in the continental US and want this, I will pay the couple bucks to ship it to you so I can get it off my table.

Hi

As the title suggests, I want to set something up so that while trouble is_open(), I have a keyboard shortcut that cycles through the various modes listed at https://github.com/folke/trouble.nvim/tree/main#commands.

I see how I can assign shortcuts to jump directly to the different modes, but I want to remember only one shortcut.

Writing a bit of lua to do this is easy enough, but I can't find any way to see what mode it's currently in, in order to write some function that toggles to the next one.

Is there any way to accomplish this?

Bonus question: Is there any way to get trouble to display on screen what mode it's currently in? Such as at the top or bottom of the trouble panel.

We moved in to our house a couple years ago and were not told too much about a pipe that sticks out of our backyard.

We are on a septic system and this pipe is sticking out from our leech field. The other houses on our block all have similar setups yet none (that I know) have a pipe coming up like ours.

It was suggested to me that this may be safe to remove, or at least remove, cover the whole for a few weeks, and as long as there's no issues, then remove.

It's not attached to anything and I can pretty easily pull it out and put it back in, although I've tended not to touch it much.

Pipe: https://imgur.com/a/yrd6pYN Hole in the ground: https://imgur.com/a/NMXurUH

Can anyone provide any insight here please?

The thing i said in the title