If you want to migrate to Linux, I would strongly suggest you set up a dual boot, and start playing with it to gain experience. Being able to switch back to something you know is a massive benefit when you are still learning.
While Linux has come a very long way, you are sure to experience some hitches along the way. If not because of Linux itself, then because you are not familiar with how to do "that one thing" on Linux.
It's usually possible to replace the firmware of d-link routers with open alternatives, such as dd-wrt.
Since all of these politicians are at the same time ensuring that they are above the law, I don't think you can count on getting them arrested.
To some extent you are correct, but also notice that the cameras in teslas are not installed in pairs, so they don't have depth perception. And since they don't have lidar or radar it doesn't have alternate methods to measure depth and distance.
You can usually draw a significantly heavier compound than recurve or longbow, because the weight drops off when the bow is fully drawn.
I would say that most regular adults would be able to draw a 42# compound with no prior training.
Jellyfin has supported Music and TV shows since the start
Many accounts can go in the red
"Trump Apologies for Insurrection, Explains He Was 'Hangry'"
Yes, but Google would not have done that if nobody used Firefox
This one terrifies me every time... When you pass a car going the opposite way, and it basically looks wike the steering wheel have a wig on... It's always an old woman... Can they even see the road? Or are they navigating using the sky?
This is a useless comment... This issue has nothing to do with the brand of printer you bought, and everything to do with the settings of your printer and whether the filament is wet. A well tuned Ender will print better than a much more expensive badly configured printe with wet filament. Of course there are printers now that are much easier to get good results with, especially because they come with build in filament dryers, and automatic tuning.
Mittens take away too much dexterity for many things. But a 3-finger glove is the perfect compromise: https://www.snowsportprofessionals.com/wp-content/uploads/2017/11/8272aca90cb09ec2c85ef324e10933f57f500daf.jpg