this post was submitted on 19 Nov 2024
190 points (97.0% liked)

Mildly Interesting

17401 readers
467 users here now

This is for strictly mildly interesting material. If it's too interesting, it doesn't belong. If it's not interesting, it doesn't belong.

This is obviously an objective criteria, so the mods are always right. Or maybe mildly right? Ahh.. what do we know?

Just post some stuff and don't spam.

founded 1 year ago
MODERATORS
 
top 37 comments
sorted by: hot top controversial new old
[–] [email protected] 3 points 3 hours ago (1 children)

Things like this were huge back in the days of PDAs. They had SDIO ports specifically for expansion. I had one for Wifi and another for Bluetooth on my Garmin PDA, so I couldn't use Bluetooth and Wifi at the same time, and both kept you from having non-volatile storage. If your battery died, your system was wiped because all the storage was in memory.

I got a Dell at the very end of the PDA era (the iPhone was already out, but was still ATT exclusive) that was super fancy because it had a CF card slot AND an SDIO port, so I could store data AND use my SDIO digital camera.

[–] [email protected] 1 points 7 minutes ago

Was it the Axim x50? That was a fine looking PDA. I had an Axim x30 and loved it to death. Its death. Then, I got an IPAQ 210. They didn't have any good accessories for that one. No clip on thumb keyboard or anything.

[–] [email protected] 15 points 3 hours ago (1 children)

I had good luck with these at my wedding. Instead of disposable cameras, I put cheap digital cameras. It didn't take long for guests to realise that the pictures were appearing on a large tv, in a sideshow. People got a lot more creative when they realised they would be seen quickly, not weeks later.

I managed to get them working without proprietary software, too. The onboard script logged into WiFi and uploaded the photos over ftp.

Given their size and the level of tech at the time, it was pretty impressive.

[–] [email protected] 3 points 3 hours ago (1 children)
[–] [email protected] 5 points 3 hours ago

Less than 10 years ago, though they were getting obsolete at the time.

[–] [email protected] 2 points 11 hours ago

I thought it was cool.

[–] [email protected] 11 points 12 hours ago

I still have a 4gb Eye-Fi that use just as an SD card to shuttle files out to my laser cutter. I assume the wi-Fi would be horrendously slow and insecure if it worked at all. Was pretty cool when we still had a standalone P&S digital camera though.

[–] [email protected] 2 points 13 hours ago (1 children)

CompactFlash, too. I 'member looking at them for a Dell PocketPC I found at a garage sale.

[–] [email protected] 2 points 11 hours ago

I had an early PDA (think it was an IPAQ, not to be confused with ipad) that had a 56k modem that connected via CF slot.

[–] [email protected] 6 points 15 hours ago

The old Toshiba ones could run a WebDAV server on them and you could log in with a PC and upload files. Was pretty sweet in a flash cart.

[–] [email protected] 12 points 16 hours ago (2 children)

Things like this would be so useful in the tinkering community, so many motherboards and such use micro SD cards or USB drives as a primary storage device. Before I gutted my 3d printer and put a computer inside it, I had to schlep the micro SD card back and forth from the printer to the computer room.. being able to send it wireless would've been great. Looked into it at the time but as other have said all the current solutions are dog shit.

[–] [email protected] 3 points 16 hours ago (3 children)

Well, Octoprint worked well for me.

[–] [email protected] 0 points 8 hours ago

I had a much better experience with Klipper once I got it up and going

[–] [email protected] 2 points 14 hours ago

Oh I'm way past octoprint and have advanced to klipper, it just would be nice for similar applications, or for people who don't want to set up something similar.

[–] [email protected] 1 points 15 hours ago (2 children)

Doesn’t octoprint need a computer inside the printer though?

[–] [email protected] 1 points 14 hours ago

A Pi 3b or Zero w would run it just fine

[–] [email protected] 2 points 14 hours ago (1 children)

Not literally inside, but yeah, it needs a computer (Raspberry Pi 3 in my case).

[–] [email protected] 1 points 13 hours ago

Right, this would allow wireless transfers without a computer.

[–] [email protected] 5 points 16 hours ago (3 children)

So what does it do, exactly? Can it act like a NIC or something?

[–] [email protected] 6 points 13 hours ago* (last edited 13 hours ago)

Most of them act(ed) like an access point.

However, the SDIO spec allows for cursed applications like WiFi adapters, Bluetooth dongles, and more to be fitted into an SD card. It was really just SPI, so in theory it also allowed things like GPS tranceivers and any other peripheral you can think of that's low bandwidth enough to work over SPI. Need Bluetooth for your Palm PDA? Here you go! Just stick a massive slab of plastic into the SD card slot!

These days SDIO is only really used for alternative (faster) transfer modes and maybe some slow and insecure WiFi access points in cameras.

[–] [email protected] 2 points 14 hours ago

Mine acted like a wifi card. I could connect to wifi networks with it.

Worked for shit, but it did work... Just enough.

[–] [email protected] 12 points 15 hours ago

Acts as access point, if you connect to it from another device you get access to stuff on the SD card (via app or built-in webserver)... at least in theory. Quality varies.

[–] [email protected] 2 points 16 hours ago

There are also horseless carriages.

[–] [email protected] 27 points 16 hours ago (3 children)

I recently looked into them. They seem shit. Dodgey outdated apps to make them work and such.

[–] [email protected] 2 points 10 hours ago

That's another reason why they're kinda dead now. Closeted apps they have to maintain just to keep that garden walled, and it was a cost they decided they also didn't want to spend.

[–] [email protected] 4 points 14 hours ago* (last edited 14 hours ago)

I tried them with a few different cameras. They sucked. They wouldn't reliably connect to Wi-Fi, and they didn't reliably upload images.

[–] [email protected] 10 points 16 hours ago (2 children)

Too bad it should be the simplest way to add wifi file transfer to a 3d printer

[–] [email protected] 2 points 9 hours ago* (last edited 9 hours ago) (1 children)

If you're interested and can get your hands on some kind of SBC (like a raspberry pi) Klipper has been amazing for my printer. You can also use pretty much any computer but it'll be much less efficient energy wise.

[–] [email protected] 1 points 5 hours ago

Nah I just want something as simple as a wifi sd card

[–] [email protected] 14 points 15 hours ago* (last edited 15 hours ago) (2 children)

I'd rather just have an ethernet port on the damn printer. You shouldn't have to cludge together basic network device functionality on devices that expensive

[–] [email protected] 4 points 14 hours ago

It's better to just install klipper on a pi or other SBC

[–] [email protected] 2 points 14 hours ago

At least my 3d printer was so inexpensive it's silly.

I'm pretty happy that the engineering team that built it doesn't need to worry about networking code and maintaining a networked device. Jappy that an open source community does it instead.

[–] [email protected] 1 points 16 hours ago

Still use mine in my cannon point and shoot. (Just as a storage device though) The software support has long ago suckified when "cloud" became all the rage, but it was awesome to sync camera <-> PC without messing with adapters or cables.

[–] [email protected] 55 points 16 hours ago (1 children)

Yup. It was used to transfer photos from a camera to a phone back in the day when cameras didn't have wireless transfer features.

[–] [email protected] 6 points 14 hours ago

They’ve been around for a while. I used one with a 5D MkII several years ago. Horrible throughput. It was only useful for a quick transfer of a few images. Totally unsuitable for field dumps.

[–] [email protected] 9 points 16 hours ago

Yep, had one for my Treo in 2006