this post was submitted on 15 Oct 2024
2 points (100.0% liked)

Bicycles

3217 readers
35 users here now

Welcome to [email protected]

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!


Community Rules


Other cycling-related communities

founded 2 years ago
MODERATORS
 

I wanted to share my experience with waxing my bike chains.

I was resistant to waxing my chains because it seems that a lot of people felt it was "too much work".

But having to constantly clean black shit off my chains after every ride, then spend time degreasing and re-lubing, I figured I'd try waxing when I got my gravel bike.

Now, thousands of KM later and having converted all three bikes to waxed, there's no way I'd go back. The time saved could be measured in hours per month.

First, the biggest complaint is chain prep. Yeah, regardless if you're waxing or not, you'll need to prep a new chain by removing the factory grease. With waxed, you do this once, and no more worrying about degreasing ever again. Make like easy and get Silca's chain stripper, and it's a 10 minute, one-step process.

Ongoing chain maintenance couldn't be easier. After every ride, give the chain a quick wipe (or not). My chain stays clean, even after a 200 km ride.

And if you ride in wet or dirty conditions? Guess what, you're in for a LOT of work if you lube your chain. With waxed, keep a second (or third) chain ready to go, and you just swap it out (10 seconds of effort). Take the dirty chain, give it a wipe if it's only been wet, or pour boiled water onto it if you want to "reset" the chain to bare metal. Then drop it into the waxing pot for a re-wax. You don't have to stand at the pot, so there's no real time commitment here. I've spent more time completely dirtying large microfiber cloths trying to get my chain "clean" when lubed (hint: it's never clean if you use a wet lube, not without solvents and an ultrasonic cleaner).

For actual immersion wax, I do it every 1000 km (sooner than you need to), and use a drip wax every 200 - 250 km to keep things fresh.

Honestly, wax is easier, cleaner, and takes less time to maintain vs wet lube.

The only downsides? The initial cost to get started. But this is offset by not having to replace chains or other components prematurely. You actually save money in the long-term when using waxed chains.

Some might argue that "you can't run waxed chains in muddy or constantly rainy conditions". Well, at the same time, your wet lube isn't really helping matters in those situations, either. Waxed is still better, and you can swap chains much faster than you can clean the grinding paste from a wet lubed chain.

Who would I not recommend waxed chains to? Someone who rarely uses their bike. Drip lube will be "good enough" in those cases. But anyone else would benefit from waxing their chain.

(page 2) 19 comments
sorted by: hot top controversial new old
[–] [email protected] 0 points 3 months ago (1 children)

In my experience a lot of people are simply not aware of liquid chain wax like Squirt and think they have to put their chain in a heated pot or something.

[–] [email protected] 0 points 3 months ago (1 children)

Drip wax is better than wet lube, but not as good as immersion wax. You CAN use drip wax over a chain that has been immersion waxed for ongoing top-ups, but it also depends on what works for you.

I use the site zerofrictioncycling to see which methods are best.

load more comments (1 replies)
[–] [email protected] 0 points 3 months ago (2 children)

I really want to try waxing my chain but I commute on my bike and more than half the year it is wet and rainy so I had always read that it wouldn't really be suitable due to the wetness. It is interesting to hear that this may not actually be as much of an issue as I was lead to believe by everything I had dead about it.

I generally keep on top of my maintainance and will wash the bike usually once a week including cleaning the filthy as fuck chain.

Think I may look into waxing again after reading this.

load more comments (2 replies)
[–] [email protected] 0 points 3 months ago

Key and Peele would be proud of your use on the chain wax

[–] [email protected] 0 points 3 months ago

The SILCA strip chip does a great job of eliminating the need for chain prep. Worth the extra cost, if you don’t want to mess around with harsh chemicals.

Waxed chains are the bees knees. I’ll never go back to using lube.

[–] [email protected] 0 points 3 months ago (1 children)

I used to thin paraffin wax with xylene just enough to make a solution that stays liquid and apply it to the chain from an old chain oil dripper bottle. If applied liberally it flushes out what little dirt has accumulated on the chain and after a quick wipe you're done. The xylene evaporates leaving you with a waxed chain.

I used dry lubes for a while too but found the homemade wax liquid the most trouble-free option.

[–] [email protected] 0 points 3 months ago

Sounds like you made a DIY version of a commercial drip wax. I use Silca's drip wax, and I'm getting really good value out of it, so I'm not motivated enough to try something homemade. But I'm glad it works for you, and no doubt is better than most other lubes!

[–] [email protected] 1 points 3 months ago* (last edited 3 months ago) (2 children)

You know what's even easier? Forgetting to lube your chain for a while. Then avoid lubing it out of shame to face your failure. Then measuring the chain wear after a year to discover no significant degradation.*

* Might require extra strong ebike-specific chains like KMC X11e EPT

[–] [email protected] 0 points 3 months ago (1 children)

Then measuring the chain wear after a year to discover no significant degradation.

How many miles/km?

Yes, good chains last longer. But good waxed chains can outlive the life of some bikes (20,000km on a waxed chain is not unheard of). And it preserves the components at the same time.

[–] [email protected] 0 points 3 months ago* (last edited 3 months ago) (1 children)

Not too many, perhaps 2000km. Spring/summer/fall, no water or dirt riding. The cassette is SLX, derailleur and shifter are XT. I don't ride a huge amount at the highest gears which suffer from higher wear due to the fewer teeth count. I recently lubed it with Silca Synerg-e and it's bit quieter but the shifting performance was excellent before and after that. With all that said, I have no doubt I've worn it more than if I had properly maintained it. Perhaps significantly more. Nevertheless I was flabbergasted at the state of the drivetrain after this much mismaintenance. 😂

[–] [email protected] 0 points 3 months ago (1 children)

Yeah, with 2000km, I wouldn't expect much wear from a high-end chain like that. Before waxing, I was using Synergetic, which does help to preserve components. But it was still dirty, and I just got tired of always seeing black when I wiped the chain!

Now, I can literally put a dropped chain back on my chainring, and don't even have to wipe my hands. It's wild how clean a chain can be after 1000km of low effort maintenance!

[–] [email protected] 0 points 3 months ago (1 children)

So you're saying I'm the perfect target audience for waxing? 🤔

load more comments (1 replies)
[–] [email protected] 0 points 3 months ago (1 children)

Even easier is not caring or even knowing that you are supposed to do anything.

[–] [email protected] 0 points 3 months ago* (last edited 3 months ago) (3 children)

Ah, you must be one of those cyclists I can hear a mile away! SQUEAK, SQUEAK, SQUEAK!! 😂

[–] [email protected] 0 points 3 months ago* (last edited 3 months ago) (1 children)

Another surprising thing for me is that at no point did it start making shameful noises.

[–] [email protected] 0 points 3 months ago (4 children)

Plot twist: You're actually using a carbon belt drive. 😆

load more comments (4 replies)
load more comments (2 replies)
load more comments
view more: ‹ prev next ›