this post was submitted on 29 Sep 2024
1 points (100.0% liked)
Art Share🎨
4508 readers
8 users here now
This is a friendly community for everyone who wants to share their art with the world! Everyone is welcomed 🎨
Rules
AI Art: While we appreciate AI generated art, there are more appropriate communities to post that type of art to. Please keep posts to non-AI generated art only. This rule includes AI art that was then manually manipulated (e.g. drawing on top of something generated by AI).
Nudity: Nudity is and has always been a part of art, but it may be something that some users don't wish to see or cannot view in certain circumstances (e.g. at work). If your work contains nudity, please mark it as NSFW. Work that contains nudity that is not marked as NSFW will be taken down. As long as the NSFW tag is used, we welcome nude subject matter.
Spam: Please do not spam this community. Self promotion is fine if you just want people to be aware of your work, but blatant attempts at spam will result in the past being removed and possibly a ban. If you aren't sure if what you are posting is spam, please contact the moderator first.
Conduct: Be nice, and don't be a jerk. Constructive criticism is OK, but don't be mean. Encouragement is always welcomed.
founded 1 year ago
MODERATORS
Thank you!
As said above - you're going to want to take it apart anyway and see what it's made of. You may be able to clean the fabric - but you'd need to know if it's glued or stretched onto a backing board of some kind first anyway.
I'd be inclined to replace it or take it to a framers for the amount of effort it may take. It wouldn't be an expensive job.
If you're interested in home repair options, if the fabric is stretched and pinned/stapled etc (i.e. not glued onto a backing board), you can try unpinning, then cleaning with any general water/mineral stain removal instructions for clothes etc - dabbing, soaking, saliva, detergent, vinegar, chuck it in the washing machine etc, then re-pinning it.
If it's glued onto a backing board, some of the cleaning might still work, but might be pretty impractical, and you'd perhaps have an easier time painting it.
You'd need a stain-blocking primer/undercoat otherwise the mark will just seep back through - then you might want a few very thin coats of gesso or other quick undercoat on it, then several very thin coats of waterbased whatever-you-like matt paint on top (no real difference in using household emulsion wall paint or the finest of artists acrylics). Multiple very thin coats will keep the fabric texture more visible.
I'd be inclined to say replacing it would be a whole lot less hassle :)
I think that settles it for us, we’ll likely take it to a framers when we get home. I’m a bit scared to try and dismantle it myself.
Thank you for the advice!
Cool. Good luck!
Just in case it's interesting/relevant, it turns out I've got a couple of a similar type knocking around - in one case, the fabric is simply glued directly to the front of the inset, between the inner and outer moulding (the other one is a fabric coated mountboard between the work and the glazing).
In this case, you'd just tear the fabric off (from the front), try and clean up some glue residue off the backing, then stick some freshly cut fabric in its place.
Technically, you wouldn't need unframe the work for that - but it's still probably safer to do so.
Anyway, let us know how you get on with the framers - and give us a before/after photo :)
Thanks again, will do! I think we’re gonna try and get it in next week so I’ll keep you update when we get it wrapped up!