Self Hosted - Self-hosting your services.

11419 readers

1 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules

No harassment
crossposts from c/Open Source & c/docker & related may be allowed, depending on context
Video Promoting is allowed if is within the topic.
No spamming.
Stay friendly.
Follow the lemmy.ml instance rules.
Tag your post. (Read under)

Important

Beginning of January 1st 2024 this rule WILL be enforced. Posts that are not tagged will be warned and if not fixed within 24h then removed!

Lemmy doesn't have tags yet, so mark it with [Question], [Help], [Project], [Other], [Promoting] or other you may think is appropriate.

Cross-posting

[email protected] is allowed!
[email protected] is allowed!
[email protected] is allowed!
[email protected] is allowed if topic has to do with selfhosting.
[email protected] is allowed!

If you see a rule-breaker please DM the mods!

founded 3 years ago

MODERATORS

[email protected]

Sbc for print and scan server (lemm.ee)

submitted 7 months ago by [email protected] to c/[email protected]

4 comments fedilink hide all child comments

Hello, i have a printer and scanner connected to a rpi 3b+ so everyone (at home) can access them through wifi.

Now the scanner is a CanoScanLide 400, which is powered though USB. This didn't seem to be an issue with the raspberry, but recently i had to re-plug everything and now the scanner isn't turning on with the raspberry anymore.

Does anyone have a suggestion for something low cost that is similar in size and power consumption and can support a usb powered device?

(Ideally also with wifi 5ghz, since this is the last device connected to the 2.4ghz)

top 4 comments

sorted by: hot top controversial new old

[–] [email protected] 0 points 7 months ago (1 children)

Out of curiosity, how did you solve that software wise? I was planning to do the same thing with my old MFP. Are you just using CUPS and SANE?

[–] [email protected] 0 points 7 months ago* (last edited 7 months ago)

Using cups for the printer and a sane web ui (scanservjs) for the scanner

[–] [email protected] 0 points 7 months ago (1 children)

If the scanner was working fine with the Pi before, I would suspect the USB cable or power supply. Try a different power supply and cables. The Raspberry Pi 3B+ can supply 1.2 amps from its USB ports which is sufficient for 2 bus powered devices. A powered USB hub can be used if you need to connect more bus powered devices to the Pi.

[–] [email protected] 0 points 7 months ago

You were right. It was the bloody usb cable powering the pi. I had switched that to a shorter one for less cable, but switching back it works again. Thank you