this post was submitted on 15 Dec 2024
319 points (98.2% liked)

Confidently Incorrect

4039 readers
6 users here now

When people are way too smug about their wrong answer.

Posting guidelines.

All posts in this community have come from elsewhere, it is not original content, the poster in this community is not OP. The person who posts in this community isn’t necessarily endorsing whatever the post is talking about and they are not looking to argue with you about the content in the post.

You are welcome to discuss and debate any topic but arguments are not welcome here. I consider debate/discussions to be civil; people with different opinions participating in respectful conversations. It becomes an argument as soon as someone becomes aggressive, nasty, insulting or just plain unpleasant. Report argumentative comments, then ignore them.

There is currently no rule about how recent a post needs to be because the community is about the comeback part, not the topic.

Rules:

• Be civil and remember the human.

• No trolling, insults or name calling. Swearing in general is fine, but not to insult someone.

• No bigotry of any kind, including homophobia, transphobia, sexism and racism.

• You are welcome to discuss and debate any topic but arguments are not welcome here. I consider debate/discussions to be civil; people with different opinions participating in respectful conversations. It becomes an argument as soon as someone becomes aggressive, nasty, insulting or just plain unpleasant. Report argumentative comments, then ignore them.

• Try not to get too political. A lot of these posts will involve politics, but this isn’t the place for political arguments.

• Participate in good faith - don’t be aggressive and don’t argue for arguements sake.

• Mark NSFW posts if they contain nudity.

• Satire is allowed but please start the post title with [satire] so other users can filter it out if they’d like.

Please report comments that break site or community rules to the mods. If you break the rules you’ll receive one warning before being banned from this community.

This community follows the rules of the lemmy.world instance and the lemmy.org code of conduct. I’ve summarised them here:

  1. Be civil, remember the human.
  2. No insulting or harassing other members. That includes name calling.
  3. Respect differences of opinion. Civil discussion/debate is fine, arguing is not. Criticise ideas, not people.
  4. Keep unrequested/unstructured critique to a minimum.
  5. Remember we have all chosen to be here voluntarily. Respect the spent time and effort people have spent creating posts in order to share something they find amusing with you.
  6. Swearing in general is fine, swearing to insult another commenter isn’t.
  7. No racism, sexism, homophobia, transphobia, xenophobia or any other type of bigotry.
  8. No incitement of violence or promotion of violent ideologies.

founded 1 year ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] -2 points 1 week ago (3 children)

Even uncompressed audio cuts out frequencies. With digital audio capture it is impossible to capture everything. There will always be a floor and a ceiling. In the case of flac it’s typically 20-24hkz.

Audiophiles have moved onto “high res lossless” because regular lossless wasn’t good enough for them.

[–] [email protected] 1 points 1 week ago

The "high res lossless" you're referring to, is still FLAC. FLAC has no downside. Whatever PCM audio you want, it can represent perfectly, while using less storage.

FLAC doesn't "limit" or "cut out" anything unless you or the software you're using is reducing the bit depth or samplerate of the source PCM waveform.

Which is something you might want to do, since it will reduce file size significantly to not use a higher samplerate than necessary. But FLAC itself doesn't do or require that.

On new formats, you might be thinking of MQA, which supposedly encodes the contents of a higher samplerate PCM waveform into a lower samplerate file, but it has been proven to be largely snake oil, and lossy as hell in terms of bit integrity.

[–] [email protected] 6 points 1 week ago* (last edited 1 week ago)

And this is because audiophiles don't understand why the audio master is 96 kHz or more often 192 kHz. You can actually easily hear the difference between 48, 96 and 192 kHz signals, but not in the way people usually think, and not after the audio has been recorded – because the main difference is latency when recording and editing. Digital sound processing works in terms of samples, and a certain amount of them have to be buffered to be able to transform the signal between time and frequency. The higher the sample rate, the shorter the buffer, and if there's one thing humans are good at hearing (relatively speaking) it's latency.

Digital instruments start being usable after 96 kHz as the latency with 256 samples buffered gets short enough that there's no distracting delay from key press to sound. 192 gives you more room to add effects and such to make the pipeline longer. Higher sample rate also makes changing frequencies, like bringing the pitch down, simpler as there's more to work with.

But after the editing is done, there's absolutely no reason to not cut the published recording to 48 or 44.1 kHz. Human ears can't hear the difference, and whatever equipment you're using will probably refuse to play anything higher than 25 kHz anyways, as e.g. the speaker coils aren't designed to let higher frequency signals through. It's not like visual information where equipment still can't match the dynamic range of the eye, and we're just starting to get to a pixel density where we can no longer see a difference between DPIs.

[–] [email protected] 2 points 1 week ago

If that's happening you need to fix your transcoder settings.