this post was submitted on 01 Jan 2024
9 points (100.0% liked)

linuxmemes

21222 readers
37 users here now

Hint: :q!

Sister communities:

Community rules (click to expand)

1. Follow the site-wide rules

2. Be civil
  • Understand the difference between a joke and an insult.
  • Do not harrass or attack members of the community for any reason.
  • Leave remarks of "peasantry" to the PCMR community. If you dislike an OS/service/application, attack the thing you dislike, not the individuals who use it. Some people may not have a choice.
  • Bigotry will not be tolerated.
  • These rules are somewhat loosened when the subject is a public figure. Still, do not attack their person or incite harrassment.
    • 3. Post Linux-related content
  • Including Unix and BSD.
  • Non-Linux content is acceptable as long as it makes a reference to Linux. For example, the poorly made mockery of sudo in Windows.
  • No porn. Even if you watch it on a Linux machine.
    • 4. No recent reposts
  • Everybody uses Arch btw, can't quit Vim, and wants to interject for a moment. You can stop now.

    • Please report posts and comments that break these rules!

    founded 1 year ago
    MODERATORS
    [email protected]
    [email protected]
    [email protected]
    9
    Completely untrue nowadays... (sh.itjust.works)
    submitted 10 months ago* (last edited 10 months ago) by [email protected] to c/[email protected]
    7 comments fedilink hide all child comments
     

    They work better in Linux than Windows, not to mention backwards compatibility.

    EDIT: I may be wrong about newest printer models, 2020 and above.

    EDIT2: Hardware problems are an entirely different issue.

    you are viewing a single comment's thread
    view the rest of the comments
    [โ€“] [email protected] 1 points 10 months ago (1 children)

    At least if my 3d printer breaks I can fix it.

    [โ€“] [email protected] 1 points 10 months ago

    I am wondering why there is no open framework for laser printing.

    There are a few parts that would have to be made out of sheet metal. The sides could be stamped for the same pattern. You then need a back and a cross section. One could theoretically make them from ABS, but ABS gets brittle with heat and the sides will shatter.

    One side of the printer is dedicated to running an ARM SOC. I'm not sure if the Arduino is up to the task, but it will need to control 3 motors, initiate a heating sequence, start a rasterizing laser, interpret a print job, communicate over network and USB, and monitor a bunch of sensors.

    The hardest parts will be obtaining print cartridges, rollers, and fusers. Designing a standard to run off a certain vendor's hardware will be a pile of issues, and nobody will just start manufacturing hardware for a handful of hobbyist printers.

    Everything else is 3d printing, springs, and screws.