Selfhosted

I used USB enclosures for my RAIDs for over 20 years. The turning point has been usb3 and then usb-c even better, but I found really no difference as in the bottleneck where the mechanical drives.

Moved to an all internal sata setup a few months back because I upgraded the space and moved to a desktop form factor.

Can still recommend the USB approach tough.

BUY A QUALITY EBCLOSURE.

I always used Linux software raid, but purchased a 4 slots USB raid/jbod enclosure to keep the number of used USB ports down.

I never ever had issues with the setup, but I purchased a known-brand enclosure, one with also e-SATA, which unfortunately was/is more a fad than even been really used.

Doing it now with a not so mini second hand pc

Did that for 3 years. Not pretty but it worked

There are small SATA backplanes that allow you to fit 3 HDDs into two 5.25" slots (or 4 HDDs in 3 slots). You can find used ones for cheap (mine was 30€), and with some cheap tower case you could get something NAS-like with hot-swap drive bays for way cheaper

I use a couple of mini pcs in exactly the setup you are talking about. Only downside is throughput. Anything built in is gonna be faster for read write ops, but usb3 is plenty fast for most things including media and data sync. I run Ubuntu with ZFS, and created raid arrays for data redundancy. It works really well. I virtualize using Incus with docker inside of those tiny VMs. It’s awesome.

I would either get a used HP Proliant microserver Gen 8 (I own one. Pretty sweet) or get a mini ITX nas case, 4 or more bays. Depending on USB doesn't seem like a good idea to me. You can always sell your mini PC. I have slowly learned to avoid the sunk cost fallacy.

I used intel nuc j5005 for 4 years iirc with 2 bay hdd enclosure, Orico brand. Never had any problem that i hear about such as random diaconnecting. Granted i used it to host my media. So i dont pratically mind if the data is gone.

I used openmediavault with usb boot drive. Internal 2.5’ drive as docker appdata. All my media files is stored on the external enclosure. The only problem i noticed is the temperature but thats because of high ambient temp.

If youre planning to use ext enclosure for critical data. Might wanna think twice. But, if you have proper backup plan. Sure why not.

I have used mini PCs as a servers for years with file serving being a major duty of them. Granted my storage needs aren't excessive, but most NUCs or Nuc-likes can hold two drives, some can have a third if you include 2.5" drives. My AsRock A300 can hold 4 drives (two of each), but its m.2 support sucks so that's not as much of a boon as it sounds. If you need significant storage, there is no replacement for something that can hold 3.5" drives though since those can now reach 20+ GB a drive.

I have the QNAP TL-D800S. It’s an 8 bay DAS but there is also a 4 bay variant. Works well for me. It uses SFF cables to connect to the PC and comes with the appropriate PCIe card which seems more robust to me than anything USB for this.

If you use a reputable brand, such as TerraMaster you'll avoid all of the scare stories you hear.

Almost everything bad seems to be along the lines of

I bought "off brand" XzzYyG from Amazon/EBay/Wish and it failed

Something like this:

https://www.terra-master.com/uk/products/homesoho-das/d6-320.html

It'll be faster than your spinning rust anyway, as long as you have high speed ports on your mini PC.

I had a setup similar to this for a year or two that ended with an hdd destroying itself one night. Probably because of the drive and not the usb enclosure I was using. Until then it worked fine, it’s definitely a viable route.

If you can swing a desktop pc case it’ll probably end up easier and cheaper and have some headroom for upgrades, that’s the route I went down after trying an escalating series of mini-pcs and running into their limits one too many times.

I’ve personally gone with an N100 Mini PC running Proxmox and two of these daisy-chained (purchased on sale). https://www.amazon.com/MAIWO-Enclosure-Cooling-Storage-Expansion/dp/B0D28Q187R/

The MAIWO DAS uses garbage JMicron firmware by default, and there are significant issues with their sleep functions. Because of that, it took me forever to figure out why SnapRAID kept failing mid-sync. Fortunately, new firmware seems to have fixed their issues and they’ve been rock solid ever since. I specifically had to update the firmware for all 4 of the USB controllers on each DAS.

Direct link to firmware that worked for me. https://gbatemp.net/attachments/bin-16028_jms578_std_v00-04-01-04_self_power_odd_20190611-zip.230929/

JMS578_STD_v00.04.01.04_Self Power + ODD.bin

MD5: 7701fb7a968e3ad4ca926dd7854806ff

Firmware updater tool for Windows found here. I ran this from a Virtualbox Windows 10 VM inside my Arch install: https://gbatemp.net/attachments/jmicron-jms578-sata-crystal-enclosure-fwupdate-zip.216335/

FwUpdateTool_v1_19_16_24.exe

MD5: 735ec8d9f99c457ce793739480c55706

Mirrors for posterity:

https://files.catbox.moe/e4121s.zip

https://mega.nz/file/OJAX2KhQ#67kIDJun92nqi56mFur_9vALSi2yTJXXv7ew5pYSJVY

Blog post detailing firmware update procedure for an external drive: https://ralimtek.com/posts/2021/jms578/

Detailed post on JMS578: https://gbatemp.net/threads/how-to-update-firmware-of-jmicron-jms578-usb3-0-sata-enclosure-black-screen-lock-music-stop.569158/

Alternate FOSS software for flashing I found later, but never used. https://github.com/BertoldVdb/jms578flash

I am currently getting a replacement for my old win10+drivepool setup using hand me down parts from my old main pc. I decided to go with UNRAID this time and other than a few headaches, its been pretty simple to get going. I am already a big fan of the container/docker/app setup. My setup is 3 12tb seagate iron wolf nas drives recertified/refurbished from ebay, the nvme ssd I used as my prior boot drive as a cache drive, and a r7 1700 and ab350m pro 4 mobo with a pny xlr8 1070gpu. It was mostly free since I was replacing it with a newer gaming build. I think I spent $280 on the hdds?