this post was submitted on 06 Oct 2024

29 points (100.0% liked)

Linux

48185 readers

1175 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

[email protected]

Need help: USB unlock LUKS on Alpine Linux (lemmy.zip)

submitted 1 month ago* (last edited 1 month ago) by [email protected] to c/[email protected]

21 comments fedilink hide all child comments

Hi folks,

I have Alpine Linux installed in an encrypted LUKS partition. I came across this tutorial which shows how to setup a key in a USB drive and when the drive is inserted and the computer booted, the LUKS partition auto-unlocks with the key on the USB drive.

https://askubuntu.com/questions/1414617/configure-ubuntu-22-04-zfs-for-automatic-luks-unlock-on-boot-via-usb-drive

I would like to setup the same thing but I do not have Alpine linux installed on ZFS, so I'm looking for ways to adapt the instructions.

So far, what I've done is:

I've setup the key on the usb stick and I can unlock the LUKS partition with that key.
create a /etc/mkinitfs/features.d/usb-unlock.sh script with the following content:

(the echo to /dev/kmesg was to check whether the script did indeed run at boot by trying to print to the kernel messages but I can't find anything in the kernel messages).

#!/bin/sh

echo "usb-unlock script starting..." > /dev/kmsg

USB_MOUNT="/mnt/my-usb-key" # The USB stick mounting point
LUKS_KEY_FILE="awesome.key"  # The name of your keyfile on the USB stick

# Search for the USB stick with the key
for device in $(ls /dev/disk/by-uuid/*); do
    mount $device $USB_MOUNT 2>/dev/null
    if [ -f "$USB_MOUNT/$LUKS_KEY_FILE" ]; then
        # Unlock the LUKS partition
        cryptsetup luksOpen /dev/sda3 cryptroot \
            --key-file "$USB_MOUNT/$LUKS_KEY_FILE" && exit 0
    fi
    umount $USB_MOUNT
done
echo "No USB key found, falling back to password prompt." # this message never appears, despite not having found the key on the usb stick

echo "usb-unlock script ending." > /dev/kmsg

I added usb-unlock to the features in mkinitfs.conf:

mytestalpine:~# cat /etc/mkinitfs/mkinitfs.conf 
features="ata base ide scsi usb virtio ext4 cryptsetup keymap usb-unlock"

run mkinitfs to rebuild the initramfs. Then reboot to test the implementation, which was unsuccessful.

What am I missing / doing wrong? Thank you for your help!

Edit: forgot to add step 4

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 1 month ago* (last edited 1 month ago) (5 children)

Thank you for your help.

I decided to give dracut a shot, see how far I could get.

I created a directory /usr/lib/dracut/modules.d/99usb-mount in which I created two scripts: A first module /usr/lib/dracut/modules.d/99usb-mount/module-setup.sh, executable:

#!/bin/bash

check() {
    return 0
}

depends() {
    echo "crypt"
    return 0
}

install() {
    inst_hook pre-mount 90 "$moddir/usb-mount.sh"
}

And a second script /usr/lib/dracut/modules.d/99usb-mount/usb-mount.sh, also executable:

#!/bin/bash

LUKS_PARTITION=/dev/sda3
USB_NKL=/dev/disk/by-uuid/<MY-UUID>
USB_MOUNT_DIR=/mnt/my-usb/
KEY_FILENAME=mykey.key

# Wait for the USB to be detected and available
for i in {1..10}; do
    if [ -b ${USB_NKL} ]; then
        break
    fi
    sleep 1
done

# Mount the USB stick
mount ${USB_NKL} ${USB_MOUNT_DIR}

# Check if the mount was successful
if [ $? -ne 0 ]; then
    echo "Failed to mount USB stick"
    exit 1
fi

# Unlock the LUKS partition using the keyfile
if [ -e "${USB_MOUNT_DIR}/${KEY_FILENAME}" ]; then
    cryptsetup luksOpen "${LUKS_PARTITION}" cryptroot --key-file "${USB_MOUNT_DIR}/${KEY_FILENAME}"
else
    echo "Keyfile not found!"
    echo "Failed to unlock LUKS partition"
    exit 1
fi

I then fixed some dependencies and got around installing device-mapper, providing dmsetup, required by dm, required by crypt, required by my scripts.

Then I ran: dracut -f, which didn't seem to have any issue and includes my module:

[...]
dracut[I]: *** Including module: usb-mount ***
[...]
dracut[E]: ldconfig exited ungracefully
[...]
dracut[I]: *** Creating initramfs image file '/boot/initramfs-6.6.54-0-lts.img' done ***

Not sure if this ldconfig error should be of any concern? The end image seems to have been created successfully.

When I check the verbose output, I see my module being included:

dracut[D]: -rwxr-xr-x 0/0       747 2024-10-07 22:30:00 lib/dracut/hooks/pre-mount/90-usb-mount.sh

However, it is here numbered 90 when above I had placed it in 99, no idea what that's about?

Then I rebooted with my key and the prompt for my password to unlock my LUKS partition still appeared.

In the kernel messages I see my usb stick being detected (perhaps not mounted?) prior to the password prompt, so not sure what's going on. Do you see any issue with my attempt? Or would you happen to have any propositions for debugging this further? I'm a bit lost as to how I can diagnose the issue.

Here are the kernel messages regarding the usb detection and a few seconds later, me unlocking the LUKS partition:

[    1.748076] usb 1-1: new high-speed USB device number 2 using xhci_hcd # usb 1-1 / sdb is my USBkey. It seems to have been detected but not mounted?
[    2.068060] device-mapper: uevent: version 1.0.3
[    2.068190] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[    2.078157] Key type encrypted registered
[    2.153792] usb 1-1: New USB device found, idVendor=067b, idProduct=2517, bcdDevice= 1.00
[    2.153799] usb 1-1: New USB device strings: Mfr=1, Product=4, SerialNumber=6
[    2.153801] usb 1-1: Product: ClipDrive
[    2.153803] usb 1-1: Manufacturer: BUFFALO
[    2.153805] usb 1-1: SerialNumber: A9200502030000221
[    2.155494] usb-storage 1-1:1.0: USB Mass Storage device detected
[    2.157341] scsi host3: usb-storage 1-1:1.0
[    2.159772] usbcore: registered new interface driver uas
[    3.221531] scsi 3:0:0:0: Direct-Access     BUFFALO  ClipDrive        1.00 PQ: 0 ANSI: 0 CCS
[    3.224250] sd 3:0:0:0: [sdb] 507904 512-byte logical blocks: (260 MB/248 MiB)
[    3.227885] sd 3:0:0:0: [sdb] Write Protect is off
[    3.227899] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.231635] sd 3:0:0:0: [sdb] No Caching mode page found
[    3.231645] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    3.247551] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[    6.323670] EXT4-fs (dm-0): orphan cleanup on readonly fs   # the 3 seconds gap is me unlocking the LUKS using the keyboard
[    6.323954] EXT4-fs (dm-0): mounted filesystem 33a8b408-37ff-4b8a-98bf-bba8b6f00604 ro with ordered data mode. Quota mode: none.
[    6.324134] Mounting root: ok.

[–] [email protected] 2 points 1 month ago (4 children)

Dracut may have this functionality already built in via rd.luks.key, so a custom module would really only make sense if you're trying to do more than that. You can probably get away with just using that if you just want it to work, but if you want to customize stuff:

I suspect your module is running well after the device is already supposed to be cryptsetup opened. The way the default crypt module handles it is by setting up udev configuration in a very early phase, and then having udev request the password a little bit later when it finds the device it's trying to open, until all devices are ready. It's a complex mechanism compared to Alpine's straightforward script, but it's much more flexible when it comes to ordering of things like RAID/network devices/LUKS/etc.

The result of that is that your code would have to run much earlier. There's some documentation on how hooks work, and the builtin rd.luks.key / keydev handler runs at cmdline 10. That's well before your pre-mount, and probably where you'd want to run your code. Based on a cursory inspection of the other code, you could either cryptsetup open it yourself if you use the name it expects (rd.luks.name= cmdline parameter or luks-$luks_container_uuid), or you could use that /tmp/luks.keys mechanism (it's a dracut-internal thing so you won't find much documentation, but it lives in crypt-lib.sh, cryptroot-ask.sh and probe-keydev.sh).

As for debugging, the cmdline manpage has a few decent enough options. rd.break=cmdline or similar can force a shell before Dracut goes through a specific phase of hooks. You should be able to manually test doing things similar to your script at that point.

[–] [email protected] 0 points 4 weeks ago (3 children)

Thank you for your help. I spent time digging into this rabbit hole, and while I've learned a lot, I am struggling to get the basics to work. Right now, I'm focusing on being able to just boot an image I created using dracut, excluding all the initial stuff I wanted, just be able to reproduce the original functionality of being able to unlock my luks partition using my keyboard.

Where I'm at: I am building my initramfs using the following command: dracut -f -v --add crypt --add lvm --add dm. I get the following output log:

::: spoiler Output log mytestalpine:~# dracut -f -v --add crypt --add lvm --add dm dracut[I]: Executing: /usr/bin/dracut -f -v --add crypt --add lvm --add dm dracut[I]: Module 'dash' will not be installed, because command 'dash' could not be found! dracut[I]: Module 'mksh' will not be installed, because command 'mksh' could not be found! dracut[I]: Module 'caps' will not be installed, because command 'capsh' could not be found! dracut[I]: Module 'modsign' will not be installed, because command 'keyctl' could not be found! dracut[I]: Module 'i18n' will not be installed, because command 'loadkeys' could not be found! dracut[I]: Module 'url-lib' will not be installed, because command 'curl' could not be found! dracut[I]: Module 'btrfs' will not be installed, because command 'btrfs' could not be found! dracut[I]: Module 'dmraid' will not be installed, because command 'dmraid' could not be found! dracut[I]: Module 'dmsquash-live-ntfs' will not be installed, because command 'ntfs-3g' could not be found! dracut[I]: Module 'mdraid' will not be installed, because command 'mdadm' could not be found! dracut[I]: Module 'crypt-gpg' will not be installed, because command 'gpg' could not be found! dracut[I]: Module 'cifs' will not be installed, because command 'mount.cifs' could not be found! dracut[I]: Module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found! dracut[I]: Module 'iscsi' will not be installed, because command 'iscsiadm' could not be found! dracut[I]: Module 'iscsi' will not be installed, because command 'iscsid' could not be found! dracut[I]: 95nfs: Could not find any command of 'rpcbind portmap'! dracut[I]: Module 'nvmf' will not be installed, because command 'nvme' could not be found! dracut[I]: Module 'nvmf' will not be installed, because command 'jq' could not be found! dracut[I]: Module 'biosdevname' will not be installed, because command 'biosdevname' could not be found! dracut[I]: Module 'masterkey' will not be installed, because command 'keyctl' could not be found! dracut[I]: Module 'dash' will not be installed, because command 'dash' could not be found! dracut[I]: Module 'mksh' will not be installed, because command 'mksh' could not be found! dracut[I]: Module 'caps' will not be installed, because command 'capsh' could not be found! dracut[I]: Module 'modsign' will not be installed, because command 'keyctl' could not be found! dracut[I]: Module 'url-lib' will not be installed, because command 'curl' could not be found! dracut[I]: Module 'btrfs' will not be installed, because command 'btrfs' could not be found! dracut[I]: Module 'dmraid' will not be installed, because command 'dmraid' could not be found! dracut[I]: Module 'dmsquash-live-ntfs' will not be installed, because command 'ntfs-3g' could not be found! dracut[I]: Module 'mdraid' will not be installed, because command 'mdadm' could not be found! dracut[I]: Module 'crypt-gpg' will not be installed, because command 'gpg' could not be found! dracut[I]: Module 'cifs' will not be installed, because command 'mount.cifs' could not be found! dracut[I]: Module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found! dracut[I]: Module 'iscsi' will not be installed, because command 'iscsiadm' could not be found! dracut[I]: Module 'iscsi' will not be installed, because command 'iscsid' could not be found! dracut[I]: 95nfs: Could not find any command of 'rpcbind portmap'! dracut[I]: Module 'nvmf' will not be installed, because command 'nvme' could not be found! dracut[I]: Module 'nvmf' will not be installed, because command 'jq' could not be found! dracut[I]: Module 'masterkey' will not be installed, because command 'keyctl' could not be found! dracut[I]: *** Including module: sh *** dracut[I]: *** Including module: busybox *** dracut[I]: *** Including module: crypt *** dracut[I]: *** Including module: dm *** dracut[D]: Skipping udev rule: 10-dm.rules dracut[D]: Skipping udev rule: 13-dm-disk.rules dracut[D]: Skipping udev rule: 95-dm-notify.rules dracut[D]: Skipping udev rule: 64-device-mapper.rules dracut[D]: Skipping udev rule: 60-persistent-storage-dm.rules dracut[D]: Skipping udev rule: 55-dm.rules dracut[I]: *** Including module: kernel-modules *** dracut[I]: *** Including module: kernel-modules-extra *** dracut[D]: kernel-modules-extra: configuration source "/run/depmod.d" does not exist dracut[D]: kernel-modules-extra: configuration source "/etc/depmod.d" does not exist dracut[D]: kernel-modules-extra: configuration source "/lib/depmod.d" does not exist dracut[I]: *** Including module: lvm *** dracut[D]: Skipping udev rule: 11-dm-lvm.rules dracut[D]: Skipping udev rule: 64-device-mapper.rules dracut[D]: Skipping udev rule: 56-lvm.rules dracut[D]: Skipping udev rule: 60-persistent-storage-lvm.rules dracut[I]: *** Including module: rootfs-block *** dracut[I]: *** Including module: terminfo *** dracut[I]: *** Including module: udev-rules *** dracut[D]: Skipping udev rule: 70-persistent-net.rules dracut[I]: *** Including module: usrmount *** dracut[I]: *** Including module: base *** dracut[I]: *** Including module: fs-lib *** dracut[I]: *** Including module: shutdown *** dracut[I]: *** Including modules done *** dracut[I]: *** Installing kernel module dependencies *** dracut[I]: *** Installing kernel module dependencies done *** dracut[I]: *** Resolving executable dependencies *** dracut[I]: *** Resolving executable dependencies done *** dracut[I]: *** Hardlinking files *** dracut[D]: Mode: real dracut[D]: Method: sha256 dracut[D]: Files: 457 dracut[D]: Linked: 0 files dracut[D]: Compared: 0 xattrs dracut[D]: Compared: 6 files dracut[D]: Saved: 0 B dracut[D]: Duration: 0.015759 seconds dracut[I]: *** Hardlinking files done *** dracut[I]: Could not find 'strip'. Not stripping the initramfs. dracut[I]: *** Generating early-microcode cpio image *** dracut[I]: *** Store current command line parameters *** dracut[I]: Stored kernel commandline: dracut[I]: rootfstype=ext4 rootflags=rw,relatime dracut[E]: ldconfig exited ungracefully dracut[I]: *** Creating image file '/boot/initramfs-6.6.56-0-lts.img' *** dracut[I]: Using auto-determined compression method 'gzip' dracut[D]: Image: /var/tmp/dracut.Ds3W3x/initramfs.img: 12M dracut[D]: ======================================================================== dracut[D]: Version: dracut-060 dracut[D]: lib/dracut/dracut-060 dracut[D]: dracut[D]: Arguments: -f -v --add 'crypt' --add 'lvm' --add 'dm' dracut[D]: lib/dracut/build-parameter.txt dracut[D]: dracut[D]: dracut modules: dracut[D]: sh dracut[D]: busybox dracut[D]: crypt dracut[D]: dm dracut[D]: kernel-modules dracut[D]: kernel-modules-extra dracut[D]: lvm dracut[D]: rootfs-block dracut[D]: terminfo dracut[D]: udev-rules dracut[D]: usrmount dracut[D]: base dracut[D]: fs-lib dracut[D]: shutdown dracut[D]: lib/dracut/modules.txt dracut[D]: ========================================================================

Then I updated the /boot/extlinux.conf file, adding the following second entry (displaying the first one just for comparison):

LABEL lts
  MENU DEFAULT
  MENU LABEL Linux lts
  LINUX vmlinuz-lts
  INITRD initramfs-lts
  APPEND root=/dev/mapper/root modules=sd-mod,usb-storage,ext4 cryptroot=<my-uuid> cryptdm=root quiet rootfstype=ext4

LABEL lts
  MENU LABEL dracut-img
  LINUX vmlinuz-lts
  INITRD /boot/initramfs-6.6.56-0-lts.img
  APPEND root=/dev/mapper/root modules=sd-mod,usb-storage,ext4 cryptroot=UUID=<my-uuid> cryptdm=root quiet rootfstype=ext4 rootflags=rw,relatime

I added the rootflags=rw,relatime because this was shown in the dracut log, so I thought perhaps that mattered. But for the most part I left it the same as the previous entry, because I'm trying to do the same thing I suppose. Perhaps I'm mistaken?

The current result of booting that image leads to a long loading (not asking for the passphrase to unlock the partition) then displaying the following error:

dracut Warning: Could not boot.

dracut Warning: "/dev/mapper/root" does not exist

Generating "/run/initramfs/rdsosreport.txt"
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot after mounting them and attach it to a bug report.

To get more debug information in the report, reboot with "rd.debug" added to the kernel command line.

Dropping to debug shell.

Before dropping me in a shell, in which I have not found anything useful to do. I am surely missing something basic as my understanding of what's happening is pretty superfluous.

What I'm noticing which may be of importance:

dracut[E]: ldconfig exited ungracefully, in the dracut output log. Perhaps this matters and should be fixed? An image is nonetheless generated.
there are many missing modules when creating an image, but I don't know if any of them matter, at least for my purpose.
One thing I can't wrap my head around is, how come the original kernal image work, when I had packages such as device-mapper and lvm missing, why did dracut complain about them missing for me to compile my own image? and would I need to add options in the /boot/extlinux.conf file, when they are not required for the original boot entry, when all I'm trying to do (as a start) is just make sure I can reproduce a bootable kernel image?

[–] [email protected] 2 points 3 weeks ago (1 children)

I think you should check your root= line and add a rd.luks.uuid= to make it open it. Dracut will by default open the root FS as /dev/mapper/luks-abcdef... based on the LUKS container UUID. You can get that with cryptsetup luksUUID. /dev/mapper/root is just never going to show up unless you've assigned a custom name to that with the barely documented rd.luks.name, and I don't see that in your setup. The cryptroot and cryptdm parameters aren't used by Dracut either.

With all of that missing it's just gonna wait for that /dev/mapper/root to magically show up out of nowhere, without ever trying to open it.

A correct cmdline will probably look something along the lines of root=/dev/mapper/luks-<uuid> modules=sd-mod,usb-storage,ext4 rootfstype=ext4 rootflags=rw,relatime rd.luks.uuid=<uuid> and once opening with passphrase works, you can start to mess with rd.luks.key=/awesome.key (and readd quiet when done debugging, if you want it that way).

ldconfig errors and the missing modules should be fine. musl's ldconfig is just a bit different but also isn't required in quite the same way. I don't think you should need to mess with modules manually. I don't think you're using LVM's userland for your setup, just all the device-mapper kernel modules. Dracut will pull all the necessary bits in for you if you're setting it up for LUKS.

[–] [email protected] 1 points 3 weeks ago* (last edited 3 weeks ago) (1 children)

I'm very grateful for your extended help. I've made some progress. I'm able to get the prompt to appear asking me for my passphrase to unlock the right partition (sda3 in my case). Entering the passphrase, however, drops me in the Dracut emergency shell after ~3min of dracut logs, seemingly looping. (Edit: the reason for why it drops me in the shell is very unclear. It says Dropping to debug shell. /bin/sh: can't access tty: job control turned off. And if I try to exit the dracut shell, it says dracut Warning: could not boot.).

In the Dracut emergency shell, checking /dev/mapper/ I see a luks-<sda3-uuid> listed. Running blkid I see it listed too with TYPE=crypto_LUKS. I also see a dev/dm-0 with a dedicated UUID, in ext4. I ran blkid which shows:

/dev/mapper/luks-705fc477-573a-4ef6-81b6-a14c43cda1f5: UUID="57955343-922a-4918-9bc1-797ca8d13a9c" TYPE="ext4"
/dev/sda1: UUID="cc5e0b03-3544-4bef-ab8b-8b72dd236926" TYPE="ext4"
/dev/sda2: UUID="4df1af6c-3199-4bb2-bb12-bcf897cfc6fc" TYPE="swap"
/dev/sda3: UUID="705fc477-573a-4ef6-81b6-a14c43cda1f5" TYPE="crypto_LUKS"
/dev/dm-0: UUID="57955343-922a-4918-9bc1-797ca8d13a9c" TYPE="ext4"

I checked the status of the filesystem running cryptsetup status /dev/mapper/luks-<sda3-uuid> and it says it is active, which I guess means it is unlocked?

I checked the /root directory, and it is empty. So I tried to mount the partition myself: mount /dev/mapper/luks-<sda3-uuid> /root but it fails saying mount: mounting /dev/mapper/luks-<sda3-uuid> on /root failed: No such file or directory and that got me really puzzled? I've been searching far and wide but I can't seem to find anyone with a similar situation. I feel like I'm close to getting this working.

Below is my syslinux kernel config, and the 2nd and 3rd items are what I booted into (/boot/extlinux.conf)

# Generated by update-extlinux 6.04_pre1-r15
DEFAULT menu.c32
PROMPT 0
MENU TITLE Alpine/Linux Boot Menu
MENU HIDDEN
MENU AUTOBOOT Alpine will be booted automatically in # seconds.
TIMEOUT 10
LABEL lts
  MENU DEFAULT
  MENU LABEL Linux lts
  LINUX vmlinuz-lts
  INITRD initramfs-lts
  APPEND root=/dev/mapper/root modules=sd-mod,usb-storage,ext4 cryptroot=UUID=705fc477-573a-4ef6-81b6-a14c43cda1f5 cryptdm=root rootfstype=ext4 rd.debug log_buf_len=1M rd.shell

LABEL lts
  MENU DEFAULT
  MENU LABEL Dracut Linux lts
  LINUX vmlinuz-lts
  INITRD /boot/initramfs-6.6.56-0-lts.img
  APPEND root=/dev/mapper/luks-705fc477-573a-4ef6-81b6-a14c43cda1f5 modules=sd-mod,usb-storage,ext4 rootfstype=ext4 rd.shell rd.debug log_buf_len=1M rd.luks.uuid=705fc477-573a-4ef6-81b6-a14c43cda1f5

LABEL lts
  MENU DEFAULT
  MENU LABEL Dracut Linux lts 2
  LINUX vmlinuz-lts
  INITRD /boot/initramfs-6.6.56-0-lts.img
  APPEND modules=sd-mod,usb-storage,ext4,dm,crypt,rootfs-block rootfstype=ext4 rootflags=rw,relatime rd.shell rd.debug log_buf_len=1M root=UUID=57955343-922a-4918-9bc1-797ca8d13a9c rd.luks.uuid=705fc477-573a-4ef6-81b6-a14c43cda1f5

And here the /proc/cmdline of the booted partition:

BOOT_IMAGE=vmlinuz-lts modules=sd-mod,usb-storage,ext4,dm,crypt,rootfs-block rootfstype=ext4 rootflags=rw,relatime rd.shell rd.debug log_buf_len=1M root=UUID=57955343-922a-4918-9bc1-797ca8d13a9c rd.luks.uuid=705fc477-573a-4ef6-81b6-a14c43cda1f5 initrd=/boot/initramfs-6.6.56-0-lts.img

Here is my setup, when I boot in my regular initramfs (the one I'm trying to replicate using dracut):

mytestalpine:~# lsblk -o NAME,FSTYPE,FSVER,LABEL,UUID,FSAVAIL,FSUSE%,MOUNTPOINTS
NAME     FSTYPE      FSVER LABEL UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda                                                                                  
├─sda1   ext4                    cc5e0b03-3544-4bef-ab8b-8b72dd236926  195.5M    21% /boot
├─sda2   swap                    4df1af6c-3199-4bb2-bb12-bcf897cfc6fc                [SWAP]
└─sda3   crypto_LUKS             705fc477-573a-4ef6-81b6-a14c43cda1f5                
  └─root ext4                    57955343-922a-4918-9bc1-797ca8d13a9c    2.3G     8% /

mytestalpine:~# lsblk -l -n /dev/sda3
sda3   8:3   0  2.8G 0 part  
root 253:0   0  2.8G 0 crypt /

Note: No idea of the relevance, but I'm testing this setup in a VM, with a BIOS firmware.

[–] [email protected] 2 points 2 weeks ago

Sorry, I've had a (self-imposed) busy week, but I have to admit, that also has me rather stumped. As far as I can tell, your second entry should work. If the device is visible in /dev/mapper under a name, it should be able to mount under that name.

The only thing I can think of is that some important module like the ext4 module might be missing somehow? You can get pretty confusing errors when that happens. Dracut is supposed to parse /etc/fstab for everything needed to boot, and maybe that's not recognizing your root for some reason. dmesg might have some useful info at the end after you try to mount it. If that's what's happening, you could try to add add_drivers+=" ext4 " in your dracut.conf and regenerate it (the spaces are important!). But if that's not it, then I'm probably out of ideas now.

load more comments (1 replies)